[PATCH 1/1] ARM: dts: ls1021a: Disable CAN nodes by default

[Alexander Stein]

These are peripherals with external signals, so disable them by default.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 7c5510e34494..49c78c84cd5d 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -866,6 +866,7 @@ can0: can at 2a70000 {
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can1: can at 2a80000 {
@@ -875,6 +876,7 @@ can1: can at 2a80000 {
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can2: can at 2a90000 {
@@ -884,6 +886,7 @@ can2: can at 2a90000 {
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		can3: can at 2aa0000 {
@@ -893,6 +896,7 @@ can3: can at 2aa0000 {
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "ipg", "per";
 			big-endian;
+			status = "disabled";
 		};
 
 		ocram1: sram at 10000000 {
-- 
2.34.1