[PATCH net-next 02/12] net: sxgbe: Separate C22 and C45 transactions

Michael Walle michael at walle.cc
Mon Jan 16 15:52:17 PST 2023


From: Andrew Lunn <andrew at lunn.ch>

The sxgdb MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.

Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Michael Walle <michael at walle.cc>
---
 drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c | 105 ++++++++++++++++++------
 1 file changed, 81 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
index fceb6d637235..0227223c06fa 100644
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_mdio.c
@@ -50,12 +50,12 @@ static void sxgbe_mdio_ctrl_data(struct sxgbe_priv_data *sp, u32 cmd,
 }
 
 static void sxgbe_mdio_c45(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
-			   int phyreg, u16 phydata)
+			   int devad, int phyreg, u16 phydata)
 {
 	u32 reg;
 
 	/* set mdio address register */
-	reg = ((phyreg >> 16) & 0x1f) << 21;
+	reg = (devad & 0x1f) << 21;
 	reg |= (phyaddr << 16) | (phyreg & 0xffff);
 	writel(reg, sp->ioaddr + sp->hw->mii.addr);
 
@@ -76,8 +76,8 @@ static void sxgbe_mdio_c22(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
 	sxgbe_mdio_ctrl_data(sp, cmd, phydata);
 }
 
-static int sxgbe_mdio_access(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
-			     int phyreg, u16 phydata)
+static int sxgbe_mdio_access_c22(struct sxgbe_priv_data *sp, u32 cmd,
+				 int phyaddr, int phyreg, u16 phydata)
 {
 	const struct mii_regs *mii = &sp->hw->mii;
 	int rc;
@@ -86,33 +86,46 @@ static int sxgbe_mdio_access(struct sxgbe_priv_data *sp, u32 cmd, int phyaddr,
 	if (rc < 0)
 		return rc;
 
-	if (phyreg & MII_ADDR_C45) {
-		sxgbe_mdio_c45(sp, cmd, phyaddr, phyreg, phydata);
-	} else {
-		 /* Ports 0-3 only support C22. */
-		if (phyaddr >= 4)
-			return -ENODEV;
+	/* Ports 0-3 only support C22. */
+	if (phyaddr >= 4)
+		return -ENODEV;
 
-		sxgbe_mdio_c22(sp, cmd, phyaddr, phyreg, phydata);
-	}
+	sxgbe_mdio_c22(sp, cmd, phyaddr, phyreg, phydata);
+
+	return sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
+}
+
+static int sxgbe_mdio_access_c45(struct sxgbe_priv_data *sp, u32 cmd,
+				 int phyaddr, int devad, int phyreg,
+				 u16 phydata)
+{
+	const struct mii_regs *mii = &sp->hw->mii;
+	int rc;
+
+	rc = sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
+	if (rc < 0)
+		return rc;
+
+	sxgbe_mdio_c45(sp, cmd, phyaddr, devad, phyreg, phydata);
 
 	return sxgbe_mdio_busy_wait(sp->ioaddr, mii->data);
 }
 
 /**
- * sxgbe_mdio_read
+ * sxgbe_mdio_read_c22
  * @bus: points to the mii_bus structure
  * @phyaddr: address of phy port
  * @phyreg: address of register with in phy register
- * Description: this function used for C45 and C22 MDIO Read
+ * Description: this function used for C22 MDIO Read
  */
-static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+static int sxgbe_mdio_read_c22(struct mii_bus *bus, int phyaddr, int phyreg)
 {
 	struct net_device *ndev = bus->priv;
 	struct sxgbe_priv_data *priv = netdev_priv(ndev);
 	int rc;
 
-	rc = sxgbe_mdio_access(priv, SXGBE_SMA_READ_CMD, phyaddr, phyreg, 0);
+	rc = sxgbe_mdio_access_c22(priv, SXGBE_SMA_READ_CMD, phyaddr,
+				   phyreg, 0);
 	if (rc < 0)
 		return rc;
 
@@ -120,21 +133,63 @@ static int sxgbe_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 }
 
 /**
- * sxgbe_mdio_write
+ * sxgbe_mdio_read_c45
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @devad: device (MMD) address
+ * @phyreg: address of register with in phy register
+ * Description: this function used for C45 MDIO Read
+ */
+static int sxgbe_mdio_read_c45(struct mii_bus *bus, int phyaddr, int devad,
+			       int phyreg)
+{
+	struct net_device *ndev = bus->priv;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+	int rc;
+
+	rc = sxgbe_mdio_access_c45(priv, SXGBE_SMA_READ_CMD, phyaddr,
+				   devad, phyreg, 0);
+	if (rc < 0)
+		return rc;
+
+	return readl(priv->ioaddr + priv->hw->mii.data) & 0xffff;
+}
+
+/**
+ * sxgbe_mdio_write_c22
+ * @bus: points to the mii_bus structure
+ * @phyaddr: address of phy port
+ * @phyreg: address of phy registers
+ * @phydata: data to be written into phy register
+ * Description: this function is used for C22 MDIO write
+ */
+static int sxgbe_mdio_write_c22(struct mii_bus *bus, int phyaddr, int phyreg,
+				u16 phydata)
+{
+	struct net_device *ndev = bus->priv;
+	struct sxgbe_priv_data *priv = netdev_priv(ndev);
+
+	return sxgbe_mdio_access_c22(priv, SXGBE_SMA_WRITE_CMD, phyaddr, phyreg,
+				     phydata);
+}
+
+/**
+ * sxgbe_mdio_write_c45
  * @bus: points to the mii_bus structure
  * @phyaddr: address of phy port
  * @phyreg: address of phy registers
+ * @devad: device (MMD) address
  * @phydata: data to be written into phy register
- * Description: this function is used for C45 and C22 MDIO write
+ * Description: this function is used for C45 MDIO write
  */
-static int sxgbe_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
-			     u16 phydata)
+static int sxgbe_mdio_write_c45(struct mii_bus *bus, int phyaddr, int devad,
+				int phyreg, u16 phydata)
 {
 	struct net_device *ndev = bus->priv;
 	struct sxgbe_priv_data *priv = netdev_priv(ndev);
 
-	return sxgbe_mdio_access(priv, SXGBE_SMA_WRITE_CMD, phyaddr, phyreg,
-				 phydata);
+	return sxgbe_mdio_access_c45(priv, SXGBE_SMA_WRITE_CMD, phyaddr,
+				     devad, phyreg, phydata);
 }
 
 int sxgbe_mdio_register(struct net_device *ndev)
@@ -161,8 +216,10 @@ int sxgbe_mdio_register(struct net_device *ndev)
 
 	/* assign mii bus fields */
 	mdio_bus->name = "sxgbe";
-	mdio_bus->read = &sxgbe_mdio_read;
-	mdio_bus->write = &sxgbe_mdio_write;
+	mdio_bus->read = sxgbe_mdio_read_c22;
+	mdio_bus->write = sxgbe_mdio_write_c22;
+	mdio_bus->read_c45 = sxgbe_mdio_read_c45;
+	mdio_bus->write_c45 = sxgbe_mdio_write_c45;
 	snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		 mdio_bus->name, priv->plat->bus_id);
 	mdio_bus->priv = ndev;

-- 
2.30.2



More information about the linux-arm-kernel mailing list