[PATCH net-next v2] net: ethernet: ti: am65-cpsw/cpts: Fix CPTS release action

Roger Quadros rogerq at kernel.org
Mon Jan 16 08:01:40 PST 2023


Hi Siddharth,

On 16/01/2023 09:43, Siddharth Vadapalli wrote:
> 
> 
> On 16/01/23 13:00, Leon Romanovsky wrote:
>> On Mon, Jan 16, 2023 at 10:15:17AM +0530, Siddharth Vadapalli wrote:
>>> The am65_cpts_release() function is registered as a devm_action in the
>>> am65_cpts_create() function in am65-cpts driver. When the am65-cpsw driver
>>> invokes am65_cpts_create(), am65_cpts_release() is added in the set of devm
>>> actions associated with the am65-cpsw driver's device.
>>>
>>> In the event of probe failure or probe deferral, the platform_drv_probe()
>>> function invokes dev_pm_domain_detach() which powers off the CPSW and the
>>> CPSW's CPTS hardware, both of which share the same power domain. Since the
>>> am65_cpts_disable() function invoked by the am65_cpts_release() function
>>> attempts to reset the CPTS hardware by writing to its registers, the CPTS
>>> hardware is assumed to be powered on at this point. However, the hardware
>>> is powered off before the devm actions are executed.
>>>
>>> Fix this by getting rid of the devm action for am65_cpts_release() and
>>> invoking it directly on the cleanup and exit paths.
>>>
>>> Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver")
>>> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
>>> Reviewed-by: Roger Quadros <rogerq at kernel.org>
>>> ---
>>> Changes from v1:
>>> 1. Fix the build issue when "CONFIG_TI_K3_AM65_CPTS" is not set. This
>>>    error was reported by kernel test robot <lkp at intel.com> at:
>>>    https://lore.kernel.org/r/202301142105.lt733Lt3-lkp@intel.com/
>>> 2. Collect Reviewed-by tag from Roger Quadros.
>>>
>>> v1:
>>> https://lore.kernel.org/r/20230113104816.132815-1-s-vadapalli@ti.com/
>>>
>>>  drivers/net/ethernet/ti/am65-cpsw-nuss.c |  8 ++++++++
>>>  drivers/net/ethernet/ti/am65-cpts.c      | 15 +++++----------
>>>  drivers/net/ethernet/ti/am65-cpts.h      |  5 +++++
>>>  3 files changed, 18 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>>> index 5cac98284184..00f25d8a026b 100644
>>> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>>> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>>> @@ -1913,6 +1913,12 @@ static int am65_cpsw_am654_get_efuse_macid(struct device_node *of_node,
>>>  	return 0;
>>>  }
>>>  
>>> +static void am65_cpsw_cpts_cleanup(struct am65_cpsw_common *common)
>>> +{
>>> +	if (IS_ENABLED(CONFIG_TI_K3_AM65_CPTS) && common->cpts)
>>
>> Why do you have IS_ENABLED(CONFIG_TI_K3_AM65_CPTS), if
>> am65_cpts_release() defined as empty when CONFIG_TI_K3_AM65_CPTS not set?
>>
>> How is it possible to have common->cpts == NULL?
> 
> Thank you for reviewing the patch. I realize now that checking
> CONFIG_TI_K3_AM65_CPTS is unnecessary.
> 
> common->cpts remains NULL in the following cases:
> 1. am65_cpsw_init_cpts() returns 0 since CONFIG_TI_K3_AM65_CPTS is not enabled.
> 2. am65_cpsw_init_cpts() returns -ENOENT since the cpts node is not defined.
> 3. The call to am65_cpts_create() fails within the am65_cpsw_init_cpts()
> function with a return value of 0 when cpts is disabled.

In this case common->cpts is not NULL and is set to error pointer.
Probe will continue normally.
Is it OK to call any of the cpts APIs with invalid handle?
Also am65_cpts_release() will be called with invalid handle.

> 4. The call to am65_cpts_create() within the am65_cpsw_init_cpts() function
> fails with an error.

In this case common->cpts is not NULL and will invoke am65_cpts_release() with
invalid handle.

> 
> Of the above cases, the am65_cpsw_cpts_cleanup() function would have to handle
> cases 1 and 3, since the probe might fail at a later point, following which the
> probe cleanup path will invoke the am65_cpts_cpts_cleanup() function. This
> function then checks for common->cpts not being NULL, so that it can invoke the
> am65_cpts_release() function with this pointer.
> 
>>
>> And why do you need special am65_cpsw_cpts_cleanup() which does nothing
>> except call to am65_cpts_release()? It will be more intuitive change
>> the latter to be exported function.
> 
> The am65_cpts_release() function expects the cpts pointer to be valid. Thus, I
> had added the am65_cpsw_cpts_cleanup() function to conditionally invoke the
> am65_cpts_release() function whenever the cpts pointer is valid. Based on your
> suggestion, I believe that you want me to check for the cpts pointer being valid
> within the am65_cpts_release() function instead, so that the
> am65_cpsw_cpts_cleanup() function doesn't have to be added. Please let me know
> if this is what you meant.
> 
> Regards,
> Siddharth.

cheers,
-roger



More information about the linux-arm-kernel mailing list