[PATCH net-next 3/6] net: stmmac: start phylink before setting up hardware

[Russell King (Oracle)]

On Mon, Jan 16, 2023 at 11:39:23AM +0100, Clément Léger wrote:
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index f2247b8cf0a3..88c941003855 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -3818,6 +3818,12 @@ static int __stmmac_open(struct net_device *dev,
>  		}
>  	}
>  
> +	/* We need to setup the phy & PCS before accessing the stmmac registers
> +	 * because in some cases (RZ/N1), if the stmmac IP is not clocked by the
> +	 * PCS, hardware init will fail because it lacks a RGMII RX clock.
> +	 */
> +	phylink_start(priv->phylink);

So what happens if you end up with the mac_link_up method being called
at this point in the driver, before the hardware has been setup ?

If you use a fixed-link, that's a real possibility.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!