[PATCH v3 5/6] ARM: dts: renesas: Use new media bus type macros

Geert Uytterhoeven geert at linux-m68k.org
Mon Jan 16 02:24:10 PST 2023


Hi Laurent,

CC linux-renesas-soc

On Sat, Jan 14, 2023 at 4:26 PM Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
> Geert, could you please take this in your tree for v6.3 ? The two
> patches that the DT changes depend on have been merged in v6.2.

Thank you, I had missed these.

> On Thu, Jun 16, 2022 at 01:14:09AM +0300, Laurent Pinchart wrote:
> > Now that a header exists with macros for the media interface bus-type
> > values, replace hardcoding numerical constants with the corresponding
> > macros in the DT sources.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>

> > ---
> >  arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts       | 11 +++++++----
> >  .../dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi     |  4 +++-
> >  .../dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi     |  4 +++-
> >  3 files changed, 13 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > index 4e58c54cde17..33ac4bd1e63b 100644
> > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> > @@ -7,6 +7,9 @@
> >   */
> >
> >  /dts-v1/;
> > +
> > +#include <dt-bindings/media/video-interfaces.h>
> > +
> >  #include "r8a7742-iwg21d-q7.dts"
> >
> >  / {
> > @@ -242,7 +245,7 @@ port {
> >               vin0ep: endpoint {
> >                       remote-endpoint = <&cam0ep>;
> >                       bus-width = <8>;
> > -                     bus-type = <6>;
> > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> >               };
> >       };
> >  };
> > @@ -273,7 +276,7 @@ port {
> >               vin1ep: endpoint {
> >                       remote-endpoint = <&cam1ep>;
> >                       bus-width = <8>;
> > -                     bus-type = <6>;
> > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> >               };
> >       };
> >  };
> > @@ -305,7 +308,7 @@ vin2ep: endpoint {
> >                       remote-endpoint = <&cam2ep>;
> >                       bus-width = <8>;
> >                       data-shift = <8>;
> > -                     bus-type = <6>;
> > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> >               };
> >       };
> >  };
> > @@ -335,7 +338,7 @@ port {
> >               vin3ep: endpoint {
> >                       remote-endpoint = <&cam3ep>;
> >                       bus-width = <8>;
> > -                     bus-type = <6>;
> > +                     bus-type = <MEDIA_BUS_TYPE_BT656>;
> >               };
> >       };
> >  };
> > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> > index 40cef0b1d1e6..c73160df619d 100644
> > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> > @@ -7,6 +7,8 @@
> >   * Copyright (C) 2020 Renesas Electronics Corp.
> >   */
> >
> > +#include <dt-bindings/media/video-interfaces.h>

This .dtsi file is only intended to be included by
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts, which already has
the include.  Hence if you don't mind, I would like to drop this part
while applying  and queuing in renesas-devel for v6.3.

> > +
> >  #define CAM_ENABLED  1
> >
> >  &CAM_PARENT_I2C {
> > @@ -26,7 +28,7 @@ port {
> >                       CAM_EP: endpoint {
> >                               bus-width = <8>;
> >                               data-shift = <2>;
> > -                             bus-type = <6>;
> > +                             bus-type = <MEDIA_BUS_TYPE_BT656>;
> >                               pclk-sample = <1>;
> >                               remote-endpoint = <&VIN_EP>;
> >                       };
> > diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
> > index f5e77f024251..a7f5cfec64b8 100644
> > --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
> > +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
> > @@ -7,6 +7,8 @@
> >   * Copyright (C) 2020 Renesas Electronics Corp.
> >   */
> >
> > +#include <dt-bindings/media/video-interfaces.h>

Likewise

> > +
> >  #define CAM_ENABLED  1
> >
> >  &CAM_PARENT_I2C {
> > @@ -21,7 +23,7 @@ ov7725 at 21 {
> >               port {
> >                       CAM_EP: endpoint {
> >                               bus-width = <8>;
> > -                             bus-type = <6>;
> > +                             bus-type = <MEDIA_BUS_TYPE_BT656>;
> >                               remote-endpoint = <&VIN_EP>;
> >                       };
> >               };

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



More information about the linux-arm-kernel mailing list