[PATCH net-next v2 0/3] Add PPS support to am65-cpts driver

[Siddharth Vadapalli]

The CPTS hardware doesn't support PPS signal generation. Using the GenFx
(periodic signal generator) function, it is possible to model a PPS signal
followed by routing it via the time sync router to the CPTS_HWy_TS_PUSH
(hardware time stamp) input, in order to generate timestamps at 1 second
intervals.

This series adds driver support for enabling PPS signal generation.
Additionally, the documentation for the am65-cpts driver is updated with
the bindings for the "ti,pps" property, which is used to inform the
pair [CPTS_HWy_TS_PUSH, GenFx] to the cpts driver.

Changes from v1:
1. Drop device-tree patches.
2. Address Roger's comments on the:
   "net: ethernet: ti: am65-cpts: add pps support" patch.
3. Collect Reviewed-by tag from Rob Herring.

v1:
https://lore.kernel.org/r/20230111114429.1297557-1-s-vadapalli@ti.com/

Grygorii Strashko (3):
  dt-binding: net: ti: am65x-cpts: add 'ti,pps' property
  net: ethernet: ti: am65-cpts: add pps support
  net: ethernet: ti: am65-cpts: adjust pps following ptp changes

 .../bindings/net/ti,k3-am654-cpts.yaml        |   8 +
 drivers/net/ethernet/ti/am65-cpts.c           | 155 ++++++++++++++++--
 2 files changed, 148 insertions(+), 15 deletions(-)

-- 
2.25.1