[PATCH] arm64: dts: imx8mm: Fix pad control for UART1_DTE_RX

Pierluigi Passaro pierluigi.passaro at gmail.com
Sun Jan 15 02:32:17 PST 2023


According section
    8.2.5.313 Select Input Register (IOMUXC_UART1_RXD_SELECT_INPUT)
of 
    i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
the required setting for this specific pin configuration is "1"

Signed-off-by: Pierluigi Passaro <pierluigi.p at variscite.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index 83c8f715cd90..b1f11098d248 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -602,7 +602,7 @@
 #define MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22                                   0x234 0x49C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_RXD_TPSMP_HDATA24                                0x234 0x49C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX                                 0x238 0x4A0 0x000 0x0 0x0
-#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x0
+#define MX8MM_IOMUXC_UART1_TXD_UART1_DTE_RX                                 0x238 0x4A0 0x4F4 0x0 0x1
 #define MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI                                  0x238 0x4A0 0x000 0x1 0x0
 #define MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23                                   0x238 0x4A0 0x000 0x5 0x0
 #define MX8MM_IOMUXC_UART1_TXD_TPSMP_HDATA25                                0x238 0x4A0 0x000 0x7 0x0
-- 
2.37.2




More information about the linux-arm-kernel mailing list