[PATCH net-next v4 0/8] Add support for two classes of VCAP rules

[Steen Hegelund]

This adds support for two classes of VCAP rules:

- Permanent rules (added e.g. for PTP support)
- TC user rules (added by the TC userspace tool)

For this to work the VCAP Loopups must be enabled from boot, so that the
"internal" clients like PTP can add rules that are always active.

When the TC tool add a flower filter the VCAP rule corresponding to this
filter will be disabled (kept in memory) until a TC matchall filter creates
a link from chain 0 to the chain (lookup) where the flower filter was
added.

When the flower filter is enabled it will be written to the appropriate
VCAP lookup and become active in HW.

Likewise the flower filter will be disabled if there is no link from chain
0 to the chain of the filter (lookup), and when that happens the
corresponding VCAP rule will be read from the VCAP instance and stored in
memory until it is deleted or enabled again.

Version History:
================
v4      Removed a leftover 'Fixes' tag from v2.  No functional changes.

v3      Removed the change that allowed rules to always be added in the
        LAN996x even though the lookups are not enabled (Horatiu Vultur).
        This was sent separately to net instead.

        Removed the 'Fixes' tags due to the patch sent to net by Horatiu
        Vultur.

        Added a check for validity of the chain source when enabling a
        lookup.

v2      Adding a missing goto exit in vcap_add_rule (Dan Carpenter).
        Added missing checks for error returns in vcap_enable_rule.

v1      Initial version


Steen Hegelund (8):
  net: microchip: vcap api: Erase VCAP cache before encoding rule
  net: microchip: sparx5: Reset VCAP counter for new rules
  net: microchip: vcap api: Always enable VCAP lookups
  net: microchip: vcap api: Convert multi-word keys/actions when
    encoding
  net: microchip: vcap api: Use src and dst chain id to chain VCAP
    lookups
  net: microchip: vcap api: Check chains when adding a tc flower filter
  net: microchip: vcap api: Add a storage state to a VCAP rule
  net: microchip: vcap api: Enable/Disable rules via chains in VCAP HW

 .../ethernet/microchip/lan966x/lan966x_goto.c |  10 +-
 .../ethernet/microchip/lan966x/lan966x_main.h |   3 +-
 .../microchip/lan966x/lan966x_tc_flower.c     |  30 +-
 .../microchip/lan966x/lan966x_tc_matchall.c   |  16 +-
 .../microchip/lan966x/lan966x_vcap_impl.c     |  21 +-
 .../microchip/sparx5/sparx5_tc_flower.c       |  28 +-
 .../microchip/sparx5/sparx5_tc_matchall.c     |  16 +-
 .../microchip/sparx5/sparx5_vcap_debugfs.c    |   2 +-
 .../microchip/sparx5/sparx5_vcap_impl.c       |  29 +-
 .../net/ethernet/microchip/vcap/vcap_api.c    | 767 +++++++++++++-----
 .../net/ethernet/microchip/vcap/vcap_api.h    |   5 -
 .../ethernet/microchip/vcap/vcap_api_client.h |   8 +-
 .../microchip/vcap/vcap_api_debugfs.c         |  57 +-
 .../microchip/vcap/vcap_api_debugfs_kunit.c   |  10 +-
 .../ethernet/microchip/vcap/vcap_api_kunit.c  |  32 +-
 .../microchip/vcap/vcap_api_private.h         |  12 +-
 16 files changed, 699 insertions(+), 347 deletions(-)

-- 
2.39.0