[PATCH v10 3/6] arm64/dts/mt8195: Add efuse node to mt8195

[Matthias Brugger]

On 12/01/2023 16:28, bchihi at baylibre.com wrote:
> From: Balsam CHIHI <bchihi at baylibre.com>
> 
> Add efuse node.
> This will be required by the thermal driver to get the calibration data.
> 
> Signed-off-by: Balsam CHIHI <bchihi at baylibre.com>

Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>

> ---
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 5d31536f4c48..09df105f4606 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1380,6 +1380,12 @@ pciephy_glb_intr: pciephy-glb-intr at 193 {
>   			dp_calibration: dp-data at 1ac {
>   				reg = <0x1ac 0x10>;
>   			};
> +			lvts_efuse_data1: lvts1-calib at 1bc {
> +				reg = <0x1bc 0x14>;
> +			};
> +			lvts_efuse_data2: lvts2-calib at 1d0 {
> +				reg = <0x1d0 0x38>;
> +			};
>   		};
>   
>   		u3phy2: t-phy at 11c40000 {