[PATCH v4 5/8] ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes

[Durai Manickam KR]

From: Manikandan Muralidharan <manikandan.m at microchip.com>

Add dma bindings for flexcom nodes in the soc dtsi file. Users those who
don't wish to use the DMA function for their flexcom functions can
overwrite the dma bindings in the board device tree file.

Signed-off-by: Manikandan Muralidharan <manikandan.m at microchip.com>
[durai.manickamkr at microchip.com: fixed code indentation and updated commit log]
Signed-off-by: Durai Manickam KR <durai.manickamkr at microchip.com>
---
 arch/arm/boot/dts/at91-sam9x60ek.dts |  3 +++
 arch/arm/boot/dts/sam9x60.dtsi       | 27 +++++++++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 6b6391d5041e..180e4b1aa2f6 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -209,6 +209,7 @@ &flx0 {
 	i2c0: i2c at 600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx0_default>;
 		i2c-analog-filter;
@@ -230,6 +231,7 @@ &flx4 {
 	status = "disabled";
 
 	spi4: spi at 400 {
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
 		status = "disabled";
@@ -254,6 +256,7 @@ &flx6 {
 	i2c6: i2c at 600 {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		dmas = <0>, <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx6_default>;
 		i2c-analog-filter;
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index fbdde3ab1086..8f44854dd8fa 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -177,6 +177,15 @@ spi4: spi at 400 {
 					interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(8))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(9))>;
+					dma-names = "tx", "rx";
 					atmel,fifo-size = <16>;
 					status = "disabled";
 				};
@@ -417,6 +426,15 @@ i2c6: i2c at 600 {
 					reg = <0x600 0x200>;
 					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>;
+					dma-names = "tx", "rx";
 					atmel,fifo-size = <16>;
 					status = "disabled";
 				};
@@ -456,6 +474,15 @@ i2c0: i2c at 600 {
 					reg = <0x600 0x200>;
 					interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
 					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(0))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(1))>;
+					dma-names = "tx", "rx";
 					atmel,fifo-size = <16>;
 					status = "disabled";
 				};
-- 
2.25.1