[PATCH 1/2] PCI: mediatek-gen3: Add power and reset control feature for downstream component

[Bjorn Helgaas]

Hi,

On Wed, Jan 11, 2023 at 11:25:41AM +0800, Jian Yang wrote:
> From: "jian.yang" <jian.yang at mediatek.com>
> 
> Make MediaTek's controller driver capable of controlling power
> supplies and reset pin of a downstream component in power-on and
> power-off flow.
> 
> Some downstream components (e.g., a WIFI chip) may need an extra
> reset other than of PERST# and their power supplies, depending on
> the requirements of platform, may need to controlled by their
> parent's driver. To meet the requirements described above, I add this
> feature to MediaTek's PCIe controller driver as a optional feature.

Is this delay (dsc-reset-msleep) specific to a device downstream from
the MediaTek controller, not to the MediaTek controller itself?  If
so, it sounds like it should be a generic value that could be used by
other drivers, too.

How do you determine the value?  If there's some PCIe spec that
determines this, please include a citation to it.  

Bjorn