[PATCH] pinctrl: rockchip: fix reading pull type on rk3568
jay.xu at rock-chips.com
jay.xu at rock-chips.com
Wed Jan 11 03:12:29 PST 2023
Hi Heiko:
--------------
jay.xu at rock-chips.com
>Hi Jay,
>
>Am Mittwoch, 11. Januar 2023, 11:26:18 CET schrieb jay.xu at rock-chips.com:
>> Hi Jonas
>>
>> --------------
>> jay.xu at rock-chips.com
>> >When reading pinconf-pins from debugfs it fails to get the configured pull
>> >type on RK3568, "unsupported pinctrl type" error messages is also reported.
>> >
>> >Fix this by adding support for RK3568 in rockchip_get_pull, including a
>> >reverse of the pull-up value swap applied in rockchip_set_pull so that
>> >pull-up is correctly reported in pinconf-pins.
>> >Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
>> >
>> >Fixes: c0dadc0e47a8 ("pinctrl: rockchip: add support for rk3568")
>> >Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
>> >---
>>
>> Signed-off-by: Jianqun Xu <jay.xu at rock-chips.com>
>
>Did you want one of
>
>- Reviewed-by:
>- Tested-by:
>- Acked-by:
>
>instead?
thanks,
Reviewed-by: Jianqun Xu <jay.xu at rock-chips.com>
>
>
>Heiko
>
>> > drivers/pinctrl/pinctrl-rockchip.c | 11 ++++++++++-
>> > 1 file changed, 10 insertions(+), 1 deletion(-)
>> >
>> >diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
>> >index 849d5fa2a362..5eeac92f610a 100644
>> >--- a/drivers/pinctrl/pinctrl-rockchip.c
>> >+++ b/drivers/pinctrl/pinctrl-rockchip.c
>> >@@ -2436,10 +2436,19 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
>> > case RK3308:
>> > case RK3368:
>> > case RK3399:
>> >+ case RK3568:
>> > case RK3588:
>> > pull_type = bank->pull_type[pin_num / 8];
>> > data >>= bit;
>> > data &= (1 << RK3188_PULL_BITS_PER_PIN) - 1;
>> >+ /*
>> >+ * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6,
>> >+ * where that pull up value becomes 3.
>> >+ */
>> >+ if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
>> >+ if (data == 3)
>> >+ data = 1;
>> >+ }
>> >
>> > return rockchip_pull_list[pull_type][data];
>> > default:
>> >@@ -2497,7 +2506,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
>> > }
>> > }
>> > /*
>> >- * In the TRM, pull-up being 1 for everything except the GPIO0_D0-D6,
>> >+ * In the TRM, pull-up being 1 for everything except the GPIO0_D3-D6,
>> > * where that pull up value becomes 3.
>> > */
>> > if (ctrl->type == RK3568 && bank->bank_num == 0 && pin_num >= 27 && pin_num <= 30) {
>> >--
>> >2.39.0
>> >
>>
>
>
>
>
More information about the linux-arm-kernel
mailing list