[PATCH v3 1/6] arm64: dts: freescale: imx8-ss-lsio: add support for lsio_pwm0-3

[Marcel Ziswiler]

From: Philippe Schenker <philippe.schenker at toradex.com>

Add support for lsio_pwm0-3.

Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

(no changes since v1)

 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 48 +++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index 1f3d225e64ec..62b7f7a3e1bc 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -28,6 +28,54 @@ lsio_bus_clk: clock-lsio-bus {
 		clock-output-names = "lsio_bus_clk";
 	};
 
+	lsio_pwm0: pwm at 5d000000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d000000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm0_lpcg 4>,
+			 <&pwm0_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_pwm1: pwm at 5d010000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d010000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm1_lpcg 4>,
+			 <&pwm1_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_1 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_pwm2: pwm at 5d020000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d020000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm2_lpcg 4>,
+			 <&pwm2_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_2 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	lsio_pwm3: pwm at 5d030000 {
+		compatible = "fsl,imx27-pwm";
+		reg = <0x5d030000 0x10000>;
+		clock-names = "ipg", "per";
+		clocks = <&pwm3_lpcg 4>,
+			 <&pwm3_lpcg 1>;
+		assigned-clocks = <&clk IMX_SC_R_PWM_3 IMX_SC_PM_CLK_PER>;
+		assigned-clock-rates = <24000000>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
 	lsio_gpio0: gpio at 5d080000 {
 		reg = <0x5d080000 0x10000>;
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.35.1