[PATCH] ARM: dts: Fix User button on stm32mp135f-dk

[Amelie Delaunay]

This patch fixes the following dtbs_check warning on stm32mp135f-dk:
arch/arm/boot/dts/stm32mp135f-dk.dtb: gpio-keys: 'user-pa13' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
>From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml

It renames user-pa13 node into button-user so that it matches gpio-keys
bindings.

Fixes: 57012d79fefd ("ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk")

Signed-off-by: Amelie Delaunay <amelie.delaunay at foss.st.com>
---
 arch/arm/boot/dts/stm32mp135f-dk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 9ff5a3eaf55b..931877d6ddb9 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -40,7 +40,7 @@ optee at dd000000 {
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pa13 {
+		button-user {
 			label = "User-PA13";
 			linux,code = <BTN_1>;
 			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-- 
2.25.1