[PATCH 3/7] dt-bindings: pinctrl: qcom: Add ipq9574 pinctrl bindings

[Krzysztof Kozlowski]

On 10/01/2023 13:13, devi priya wrote:
> Add device tree binding documentation details for ipq9574
> pinctrl driver
> 

Subject: drop second/last, redundant "bindings". The "dt-bindings"
prefix is already stating that these are bindings.

> Co-developed-by: Anusha Rao <quic_anusha at quicinc.com>
> Signed-off-by: Anusha Rao <quic_anusha at quicinc.com>
> Signed-off-by: devi priya <quic_devipriy at quicinc.com>
> ---
>  .../bindings/pinctrl/qcom,ipq9574-tlmm.yaml   | 129 ++++++++++++++++++
>  1 file changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
> new file mode 100644
> index 000000000000..f9cb457bc18d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
> @@ -0,0 +1,129 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
> +
> +maintainers:
> +  - Anusha <quic_anusha at quicinc.com>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  IPQ9574 platform.

No, please rebase on recent changes. You started your work on some old
bindings so your binding likely includes all issues we fixed.

> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: qcom,ipq9574-tlmm
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts: true
> +  interrupt-controller: true
> +  "#interrupt-cells": true
> +  gpio-controller: true
> +  gpio-reserved-ranges: true
> +  "#gpio-cells": true
> +  gpio-ranges: true
> +  wakeup-parent: true

Missing gpio-line-names and constraints for ranges. Look at other bindings.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/qcom-ipq9574-tlmm-state"
> +        additionalProperties: false
> +
> +$defs:
> +  qcom-ipq9574-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
> +            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
> +                      sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
> +                      qdsd_data3 ]

These are ordered by name.

> +        minItems: 1
> +        maxItems: 8
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +        enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
> +                audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
> +                blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
> +                blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
> +                blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
> +                cri_trng1, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
> +                gcc_plltest, gcc_tlmm, mac00, mac01, mac10, mac11, mdc,
> +                mdio, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pcie2_clk,
> +                pcie2_wake, pcie3_clk, pcie3_wake, prng_rosc0, prng_rosc1,
> +                prng_rosc2, prng_rosc3, pta1_0, pta1_1, pta1_2, pta20, pta21,
> +                pwm00, pwm01, pwm02, pwm03, pwm04, pwm10, pwm11, pwm12, pwm13,
> +                pwm14, pwm20, pwm21, pwm22, pwm23, pwm24, pwm30, pwm31, pwm32,
> +                pwm33, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
> +                qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
> +                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
> +                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
> +                dss_tracedata_b, qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
> +                rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
> +                wci20, wci21, wsa_swrm, audio_pdm0 ]

These too

> +
> +      bias-disable: true
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +
> +    additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    tlmm: pinctrl at 1000000 {
> +        compatible = "qcom,ipq9574-tlmm";
> +        reg = <0x01000000 0x300000>;
> +        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +        gpio-ranges = <&tlmm 0 0 65>;
> +
> +        uart2-state {
> +                pins = "gpio34", "gpio35";

Wrong indentation.

> +                function = "blsp2_uart";
> +                drive-strength = <8>;
> +                bias-pull-down;
> +        };
> +    };

Best regards,
Krzysztof