[PATCH v4 14/14] soc: mtk-svs: mt8183: refactor o_slope calculation

[Roger Lu]

The o_slope value is dependent of the o_slope_sign, refactor code to get
rid of unnecessary if constructs.

Signed-off-by: Matthias Brugger <matthias.bgg at gmail.com>
Signed-off-by: Roger Lu <roger.lu at mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 drivers/soc/mediatek/mtk-svs.c | 51 +++++++++++++++-------------------
 1 file changed, 22 insertions(+), 29 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-svs.c b/drivers/soc/mediatek/mtk-svs.c
index 89117807e85d..8cfbf8ffb138 100644
--- a/drivers/soc/mediatek/mtk-svs.c
+++ b/drivers/soc/mediatek/mtk-svs.c
@@ -1944,26 +1944,27 @@ static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
 	o_slope_sign = (svsp->tefuse[0] >> 7) & BIT(0);
 
 	ts_id = (svsp->tefuse[1] >> 9) & BIT(0);
-	o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0);
-
-	if (adc_cali_en_t == 1) {
-		if (!ts_id)
-			o_slope = 0;
-
-		if (adc_ge_t < 265 || adc_ge_t > 758 ||
-		    adc_oe_t < 265 || adc_oe_t > 758 ||
-		    o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 ||
-		    o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 ||
-		    o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 ||
-		    o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 ||
-		    o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 ||
-		    o_vtsabb < -8 || o_vtsabb > 484 ||
-		    degc_cali < 1 || degc_cali > 63) {
-			dev_err(svsp->dev, "bad thermal efuse, no mon mode\n");
-			goto remove_mt8183_svsb_mon_mode;
-		}
+	if (!ts_id) {
+		o_slope = 1534;
 	} else {
-		dev_err(svsp->dev, "no thermal efuse, no mon mode\n");
+		o_slope = (svsp->tefuse[0] >> 26) & GENMASK(5, 0);
+		if (!o_slope_sign)
+			o_slope = 1534 + o_slope * 10;
+		else
+			o_slope = 1534 - o_slope * 10;
+	}
+
+	if (adc_cali_en_t == 0 ||
+	    adc_ge_t < 265 || adc_ge_t > 758 ||
+	    adc_oe_t < 265 || adc_oe_t > 758 ||
+	    o_vtsmcu[0] < -8 || o_vtsmcu[0] > 484 ||
+	    o_vtsmcu[1] < -8 || o_vtsmcu[1] > 484 ||
+	    o_vtsmcu[2] < -8 || o_vtsmcu[2] > 484 ||
+	    o_vtsmcu[3] < -8 || o_vtsmcu[3] > 484 ||
+	    o_vtsmcu[4] < -8 || o_vtsmcu[4] > 484 ||
+	    o_vtsabb < -8 || o_vtsabb > 484 ||
+	    degc_cali < 1 || degc_cali > 63) {
+		dev_err(svsp->dev, "bad thermal efuse, no mon mode\n");
 		goto remove_mt8183_svsb_mon_mode;
 	}
 
@@ -1982,11 +1983,7 @@ static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
 		x_roomt[i] = (((format[i] * 10000) / 4096) * 10000) / gain;
 
 	temp0 = (10000 * 100000 / gain) * 15 / 18;
-
-	if (!o_slope_sign)
-		mts = (temp0 * 10) / (1534 + o_slope * 10);
-	else
-		mts = (temp0 * 10) / (1534 - o_slope * 10);
+	mts = (temp0 * 10) / o_slope;
 
 	for (idx = 0; idx < svsp->bank_max; idx++) {
 		svsb = &svsp->banks[idx];
@@ -2013,11 +2010,7 @@ static bool svs_mt8183_efuse_parsing(struct svs_platform *svsp)
 		temp0 = (degc_cali * 10 / 2);
 		temp1 = ((10000 * 100000 / 4096 / gain) *
 			 oe + tb_roomt * 10) * 15 / 18;
-
-		if (!o_slope_sign)
-			temp2 = temp1 * 100 / (1534 + o_slope * 10);
-		else
-			temp2 = temp1 * 100 / (1534 - o_slope * 10);
+		temp2 = temp1 * 100 / o_slope;
 
 		svsb->bts = (temp0 + temp2 - 250) * 4 / 10;
 	}
-- 
2.18.0