[PATCH v7 3/4] arm64: dts: qcom: sa8295-adp: Enable DP instances

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson at linaro.org>

The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.

Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.

Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
---

Changes since v6:
- None

 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
 1 file changed, 241 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 84cb6f3eeb56..c35e16b087b8 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "DP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_phy_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "DP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_phy_out>;
+			};
+		};
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp3_phy_out>;
+			};
+		};
+	};
+
+	edp2-connector {
+		compatible = "dp-connector";
+		label = "EDP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp3-connector {
+		compatible = "dp-connector";
+		label = "EDP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp3_phy_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -159,13 +243,168 @@ vreg_l7g: ldo7 {
 
 		vreg_l8g: ldo8 {
 			regulator-name = "vreg_l8g";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11g: ldo11 {
+			regulator-name = "vreg_l11g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 };
 
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss0_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp0_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp2_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss0_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss0_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp1_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss1_dp0_phy_out: endpoint {
+				remote-endpoint = <&dp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp0_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp1 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss1_dp1_phy_out: endpoint {
+				remote-endpoint = <&dp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp1_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp2 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss1_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp2_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&mdss1_dp3 {
+	data-lanes = <0 1 2 3>;
+
+	status = "okay";
+
+	ports {
+		port at 1 {
+			reg = <1>;
+			mdss1_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp3_phy {
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
 &pcie2a {
 	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
-- 
2.37.3