[PATCH v4 2/8] arm64: Drop SYS_ from SPE register defines
Anshuman Khandual
anshuman.khandual at arm.com
Mon Jan 9 23:54:47 PST 2023
LGTM, except couple of small possible improvements.
On 1/10/23 00:56, Rob Herring wrote:
> We currently have a non-standard SYS_ prefix in the constants generated
> for the SPE register bitfields. Drop this in preparation for automatic
> register definition generation.
>
> The SPE mask defines were unshifted, and the SPE register field
> enumerations were shifted. The autogenerated defines are the opposite,
> so make the necessary adjustments.
>
> No functional changes.
>
> Tested-by: James Clark <james.clark at arm.com>
> Signed-off-by: Rob Herring <robh at kernel.org>
> ---
> v4:
> - Rebase on v6.2-rc1
> v3:
> - No change
> v2:
> - New patch
> ---
> arch/arm64/include/asm/el2_setup.h | 6 +-
> arch/arm64/include/asm/sysreg.h | 112 ++++++++++++++++++-------------------
> arch/arm64/kvm/debug.c | 2 +-
> arch/arm64/kvm/hyp/nvhe/debug-sr.c | 2 +-
> drivers/perf/arm_spe_pmu.c | 85 ++++++++++++++--------------
> 5 files changed, 103 insertions(+), 104 deletions(-)
>
> diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
> index 668569adf4d3..f9da43e53cdb 100644
> --- a/arch/arm64/include/asm/el2_setup.h
> +++ b/arch/arm64/include/asm/el2_setup.h
> @@ -53,10 +53,10 @@
> cbz x0, .Lskip_spe_\@ // Skip if SPE not present
>
> mrs_s x0, SYS_PMBIDR_EL1 // If SPE available at EL2,
> - and x0, x0, #(1 << SYS_PMBIDR_EL1_P_SHIFT)
> + and x0, x0, #(1 << PMBIDR_EL1_P_SHIFT)
> cbnz x0, .Lskip_spe_el2_\@ // then permit sampling of physical
> - mov x0, #(1 << SYS_PMSCR_EL2_PCT_SHIFT | \
> - 1 << SYS_PMSCR_EL2_PA_SHIFT)
> + mov x0, #(1 << PMSCR_EL2_PCT_SHIFT | \
> + 1 << PMSCR_EL2_PA_SHIFT)
> msr_s SYS_PMSCR_EL2, x0 // addresses and physical counter
> .Lskip_spe_el2_\@:
> mov x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
> diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
> index c4ce16333750..dbb0e8e22cf4 100644
> --- a/arch/arm64/include/asm/sysreg.h
> +++ b/arch/arm64/include/asm/sysreg.h
> @@ -218,59 +218,59 @@
> /*** Statistical Profiling Extension ***/
> /* ID registers */
> #define SYS_PMSIDR_EL1 sys_reg(3, 0, 9, 9, 7)
> -#define SYS_PMSIDR_EL1_FE_SHIFT 0
> -#define SYS_PMSIDR_EL1_FT_SHIFT 1
> -#define SYS_PMSIDR_EL1_FL_SHIFT 2
> -#define SYS_PMSIDR_EL1_ARCHINST_SHIFT 3
> -#define SYS_PMSIDR_EL1_LDS_SHIFT 4
> -#define SYS_PMSIDR_EL1_ERND_SHIFT 5
> -#define SYS_PMSIDR_EL1_INTERVAL_SHIFT 8
> -#define SYS_PMSIDR_EL1_INTERVAL_MASK 0xfUL
> -#define SYS_PMSIDR_EL1_MAXSIZE_SHIFT 12
> -#define SYS_PMSIDR_EL1_MAXSIZE_MASK 0xfUL
> -#define SYS_PMSIDR_EL1_COUNTSIZE_SHIFT 16
> -#define SYS_PMSIDR_EL1_COUNTSIZE_MASK 0xfUL
> +#define PMSIDR_EL1_FE_SHIFT 0
> +#define PMSIDR_EL1_FT_SHIFT 1
> +#define PMSIDR_EL1_FL_SHIFT 2
> +#define PMSIDR_EL1_ARCHINST_SHIFT 3
> +#define PMSIDR_EL1_LDS_SHIFT 4
> +#define PMSIDR_EL1_ERND_SHIFT 5
> +#define PMSIDR_EL1_INTERVAL_SHIFT 8
> +#define PMSIDR_EL1_INTERVAL_MASK GENMASK_ULL(11, 8)
> +#define PMSIDR_EL1_MAXSIZE_SHIFT 12
> +#define PMSIDR_EL1_MAXSIZE_MASK GENMASK_ULL(15, 12)
> +#define PMSIDR_EL1_COUNTSIZE_SHIFT 16
> +#define PMSIDR_EL1_COUNTSIZE_MASK GENMASK_ULL(19, 16)
>
> #define SYS_PMBIDR_EL1 sys_reg(3, 0, 9, 10, 7)
> -#define SYS_PMBIDR_EL1_ALIGN_SHIFT 0
> -#define SYS_PMBIDR_EL1_ALIGN_MASK 0xfU
> -#define SYS_PMBIDR_EL1_P_SHIFT 4
> -#define SYS_PMBIDR_EL1_F_SHIFT 5
> +#define PMBIDR_EL1_ALIGN_SHIFT 0
> +#define PMBIDR_EL1_ALIGN_MASK 0xfU
Although functionally same, s/0xfU/GENMAS_ULL(3, 0) might make it uniform
across other changes.
> +#define PMBIDR_EL1_P_SHIFT 4
> +#define PMBIDR_EL1_F_SHIFT 5
>
> /* Sampling controls */
> #define SYS_PMSCR_EL1 sys_reg(3, 0, 9, 9, 0)
> -#define SYS_PMSCR_EL1_E0SPE_SHIFT 0
> -#define SYS_PMSCR_EL1_E1SPE_SHIFT 1
> -#define SYS_PMSCR_EL1_CX_SHIFT 3
> -#define SYS_PMSCR_EL1_PA_SHIFT 4
> -#define SYS_PMSCR_EL1_TS_SHIFT 5
> -#define SYS_PMSCR_EL1_PCT_SHIFT 6
> +#define PMSCR_EL1_E0SPE_SHIFT 0
> +#define PMSCR_EL1_E1SPE_SHIFT 1
> +#define PMSCR_EL1_CX_SHIFT 3
> +#define PMSCR_EL1_PA_SHIFT 4
> +#define PMSCR_EL1_TS_SHIFT 5
> +#define PMSCR_EL1_PCT_SHIFT 6
>
> #define SYS_PMSCR_EL2 sys_reg(3, 4, 9, 9, 0)
> -#define SYS_PMSCR_EL2_E0HSPE_SHIFT 0
> -#define SYS_PMSCR_EL2_E2SPE_SHIFT 1
> -#define SYS_PMSCR_EL2_CX_SHIFT 3
> -#define SYS_PMSCR_EL2_PA_SHIFT 4
> -#define SYS_PMSCR_EL2_TS_SHIFT 5
> -#define SYS_PMSCR_EL2_PCT_SHIFT 6
> +#define PMSCR_EL2_E0HSPE_SHIFT 0
> +#define PMSCR_EL2_E2SPE_SHIFT 1
> +#define PMSCR_EL2_CX_SHIFT 3
> +#define PMSCR_EL2_PA_SHIFT 4
> +#define PMSCR_EL2_TS_SHIFT 5
> +#define PMSCR_EL2_PCT_SHIFT 6
>
> #define SYS_PMSICR_EL1 sys_reg(3, 0, 9, 9, 2)
>
> #define SYS_PMSIRR_EL1 sys_reg(3, 0, 9, 9, 3)
> -#define SYS_PMSIRR_EL1_RND_SHIFT 0
> -#define SYS_PMSIRR_EL1_INTERVAL_SHIFT 8
> -#define SYS_PMSIRR_EL1_INTERVAL_MASK 0xffffffUL
> +#define PMSIRR_EL1_RND_SHIFT 0
> +#define PMSIRR_EL1_INTERVAL_SHIFT 8
> +#define PMSIRR_EL1_INTERVAL_MASK GENMASK_ULL(31, 8)
>
> /* Filtering controls */
> #define SYS_PMSNEVFR_EL1 sys_reg(3, 0, 9, 9, 1)
>
> #define SYS_PMSFCR_EL1 sys_reg(3, 0, 9, 9, 4)
> -#define SYS_PMSFCR_EL1_FE_SHIFT 0
> -#define SYS_PMSFCR_EL1_FT_SHIFT 1
> -#define SYS_PMSFCR_EL1_FL_SHIFT 2
> -#define SYS_PMSFCR_EL1_B_SHIFT 16
> -#define SYS_PMSFCR_EL1_LD_SHIFT 17
> -#define SYS_PMSFCR_EL1_ST_SHIFT 18
> +#define PMSFCR_EL1_FE_SHIFT 0
> +#define PMSFCR_EL1_FT_SHIFT 1
> +#define PMSFCR_EL1_FL_SHIFT 2
> +#define PMSFCR_EL1_B_SHIFT 16
> +#define PMSFCR_EL1_LD_SHIFT 17
> +#define PMSFCR_EL1_ST_SHIFT 18
>
> #define SYS_PMSEVFR_EL1 sys_reg(3, 0, 9, 9, 5)
> #define PMSEVFR_EL1_RES0_IMP \
> @@ -280,37 +280,37 @@
> (PMSEVFR_EL1_RES0_IMP & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11)))
>
> #define SYS_PMSLATFR_EL1 sys_reg(3, 0, 9, 9, 6)
> -#define SYS_PMSLATFR_EL1_MINLAT_SHIFT 0
> +#define PMSLATFR_EL1_MINLAT_SHIFT 0
>
> /* Buffer controls */
> #define SYS_PMBLIMITR_EL1 sys_reg(3, 0, 9, 10, 0)
> -#define SYS_PMBLIMITR_EL1_E_SHIFT 0
> -#define SYS_PMBLIMITR_EL1_FM_SHIFT 1
> -#define SYS_PMBLIMITR_EL1_FM_MASK 0x3UL
> -#define SYS_PMBLIMITR_EL1_FM_STOP_IRQ (0 << SYS_PMBLIMITR_EL1_FM_SHIFT)
> +#define PMBLIMITR_EL1_E_SHIFT 0
> +#define PMBLIMITR_EL1_FM_SHIFT 1
> +#define PMBLIMITR_EL1_FM_MASK GENMASK_ULL(2, 1)
> +#define PMBLIMITR_EL1_FM_STOP_IRQ 0
>
> #define SYS_PMBPTR_EL1 sys_reg(3, 0, 9, 10, 1)
>
> /* Buffer error reporting */
> #define SYS_PMBSR_EL1 sys_reg(3, 0, 9, 10, 3)
> -#define SYS_PMBSR_EL1_COLL_SHIFT 16
> -#define SYS_PMBSR_EL1_S_SHIFT 17
> -#define SYS_PMBSR_EL1_EA_SHIFT 18
> -#define SYS_PMBSR_EL1_DL_SHIFT 19
> -#define SYS_PMBSR_EL1_EC_SHIFT 26
> -#define SYS_PMBSR_EL1_EC_MASK 0x3fUL
> +#define PMBSR_EL1_COLL_SHIFT 16
> +#define PMBSR_EL1_S_SHIFT 17
> +#define PMBSR_EL1_EA_SHIFT 18
> +#define PMBSR_EL1_DL_SHIFT 19
> +#define PMBSR_EL1_EC_SHIFT 26
> +#define PMBSR_EL1_EC_MASK GENMASK_ULL(31, 26)
>
> -#define SYS_PMBSR_EL1_EC_BUF (0x0UL << SYS_PMBSR_EL1_EC_SHIFT)
> -#define SYS_PMBSR_EL1_EC_FAULT_S1 (0x24UL << SYS_PMBSR_EL1_EC_SHIFT)
> -#define SYS_PMBSR_EL1_EC_FAULT_S2 (0x25UL << SYS_PMBSR_EL1_EC_SHIFT)
> +#define PMBSR_EL1_EC_BUF 0x0UL
> +#define PMBSR_EL1_EC_FAULT_S1 0x24UL
> +#define PMBSR_EL1_EC_FAULT_S2 0x25UL
>
> -#define SYS_PMBSR_EL1_FAULT_FSC_SHIFT 0
> -#define SYS_PMBSR_EL1_FAULT_FSC_MASK 0x3fUL
> +#define PMBSR_EL1_FAULT_FSC_SHIFT 0
> +#define PMBSR_EL1_FAULT_FSC_MASK 0x3fUL
>
> -#define SYS_PMBSR_EL1_BUF_BSC_SHIFT 0
> -#define SYS_PMBSR_EL1_BUF_BSC_MASK 0x3fUL
> +#define PMBSR_EL1_BUF_BSC_SHIFT 0
> +#define PMBSR_EL1_BUF_BSC_MASK 0x3fUL
Although functionally same, s/0x3fUL/GENMAS_ULL(5, 0) might make it uniform
across other changes.
>
> -#define SYS_PMBSR_EL1_BUF_BSC_FULL (0x1UL << SYS_PMBSR_EL1_BUF_BSC_SHIFT)
> +#define PMBSR_EL1_BUF_BSC_FULL 0x1UL
>
> /*** End of Statistical Profiling Extension ***/
>
> diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
> index fccf9ec01813..55f80fb93925 100644
> --- a/arch/arm64/kvm/debug.c
> +++ b/arch/arm64/kvm/debug.c
> @@ -328,7 +328,7 @@ void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu)
> * we may need to check if the host state needs to be saved.
> */
> if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_PMSVer_SHIFT) &&
> - !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(SYS_PMBIDR_EL1_P_SHIFT)))
> + !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(PMBIDR_EL1_P_SHIFT)))
> vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE);
>
> /* Check if we have TRBE implemented and available at the host */
> diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
> index e17455773b98..2673bde62fad 100644
> --- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c
> +++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
> @@ -27,7 +27,7 @@ static void __debug_save_spe(u64 *pmscr_el1)
> * Check if the host is actually using it ?
> */
> reg = read_sysreg_s(SYS_PMBLIMITR_EL1);
> - if (!(reg & BIT(SYS_PMBLIMITR_EL1_E_SHIFT)))
> + if (!(reg & BIT(PMBLIMITR_EL1_E_SHIFT)))
> return;
>
> /* Yes; save the control register and disable data generation */
> diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
> index 65cf93dcc8ee..814ed18346b6 100644
> --- a/drivers/perf/arm_spe_pmu.c
> +++ b/drivers/perf/arm_spe_pmu.c
> @@ -12,6 +12,7 @@
> #define DRVNAME PMUNAME "_pmu"
> #define pr_fmt(fmt) DRVNAME ": " fmt
>
> +#include <linux/bitfield.h>
> #include <linux/bitops.h>
> #include <linux/bug.h>
> #include <linux/capability.h>
> @@ -282,18 +283,18 @@ static u64 arm_spe_event_to_pmscr(struct perf_event *event)
> struct perf_event_attr *attr = &event->attr;
> u64 reg = 0;
>
> - reg |= ATTR_CFG_GET_FLD(attr, ts_enable) << SYS_PMSCR_EL1_TS_SHIFT;
> - reg |= ATTR_CFG_GET_FLD(attr, pa_enable) << SYS_PMSCR_EL1_PA_SHIFT;
> - reg |= ATTR_CFG_GET_FLD(attr, pct_enable) << SYS_PMSCR_EL1_PCT_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, ts_enable) << PMSCR_EL1_TS_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, pa_enable) << PMSCR_EL1_PA_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, pct_enable) << PMSCR_EL1_PCT_SHIFT;
>
> if (!attr->exclude_user)
> - reg |= BIT(SYS_PMSCR_EL1_E0SPE_SHIFT);
> + reg |= BIT(PMSCR_EL1_E0SPE_SHIFT);
>
> if (!attr->exclude_kernel)
> - reg |= BIT(SYS_PMSCR_EL1_E1SPE_SHIFT);
> + reg |= BIT(PMSCR_EL1_E1SPE_SHIFT);
>
> if (get_spe_event_has_cx(event))
> - reg |= BIT(SYS_PMSCR_EL1_CX_SHIFT);
> + reg |= BIT(PMSCR_EL1_CX_SHIFT);
>
> return reg;
> }
> @@ -302,8 +303,7 @@ static void arm_spe_event_sanitise_period(struct perf_event *event)
> {
> struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
> u64 period = event->hw.sample_period;
> - u64 max_period = SYS_PMSIRR_EL1_INTERVAL_MASK
> - << SYS_PMSIRR_EL1_INTERVAL_SHIFT;
> + u64 max_period = PMSIRR_EL1_INTERVAL_MASK;
>
> if (period < spe_pmu->min_period)
> period = spe_pmu->min_period;
> @@ -322,7 +322,7 @@ static u64 arm_spe_event_to_pmsirr(struct perf_event *event)
>
> arm_spe_event_sanitise_period(event);
>
> - reg |= ATTR_CFG_GET_FLD(attr, jitter) << SYS_PMSIRR_EL1_RND_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, jitter) << PMSIRR_EL1_RND_SHIFT;
> reg |= event->hw.sample_period;
>
> return reg;
> @@ -333,18 +333,18 @@ static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
> struct perf_event_attr *attr = &event->attr;
> u64 reg = 0;
>
> - reg |= ATTR_CFG_GET_FLD(attr, load_filter) << SYS_PMSFCR_EL1_LD_SHIFT;
> - reg |= ATTR_CFG_GET_FLD(attr, store_filter) << SYS_PMSFCR_EL1_ST_SHIFT;
> - reg |= ATTR_CFG_GET_FLD(attr, branch_filter) << SYS_PMSFCR_EL1_B_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, load_filter) << PMSFCR_EL1_LD_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, store_filter) << PMSFCR_EL1_ST_SHIFT;
> + reg |= ATTR_CFG_GET_FLD(attr, branch_filter) << PMSFCR_EL1_B_SHIFT;
>
> if (reg)
> - reg |= BIT(SYS_PMSFCR_EL1_FT_SHIFT);
> + reg |= BIT(PMSFCR_EL1_FT_SHIFT);
>
> if (ATTR_CFG_GET_FLD(attr, event_filter))
> - reg |= BIT(SYS_PMSFCR_EL1_FE_SHIFT);
> + reg |= BIT(PMSFCR_EL1_FE_SHIFT);
>
> if (ATTR_CFG_GET_FLD(attr, min_latency))
> - reg |= BIT(SYS_PMSFCR_EL1_FL_SHIFT);
> + reg |= BIT(PMSFCR_EL1_FL_SHIFT);
>
> return reg;
> }
> @@ -359,7 +359,7 @@ static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
> {
> struct perf_event_attr *attr = &event->attr;
> return ATTR_CFG_GET_FLD(attr, min_latency)
> - << SYS_PMSLATFR_EL1_MINLAT_SHIFT;
> + << PMSLATFR_EL1_MINLAT_SHIFT;
> }
>
> static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len)
> @@ -511,7 +511,7 @@ static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
> limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle)
> : arm_spe_pmu_next_off(handle);
> if (limit)
> - limit |= BIT(SYS_PMBLIMITR_EL1_E_SHIFT);
> + limit |= BIT(PMBLIMITR_EL1_E_SHIFT);
>
> limit += (u64)buf->base;
> base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf);
> @@ -570,28 +570,28 @@ arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle)
>
> /* Service required? */
> pmbsr = read_sysreg_s(SYS_PMBSR_EL1);
> - if (!(pmbsr & BIT(SYS_PMBSR_EL1_S_SHIFT)))
> + if (!(pmbsr & BIT(PMBSR_EL1_S_SHIFT)))
> return SPE_PMU_BUF_FAULT_ACT_SPURIOUS;
>
> /*
> * If we've lost data, disable profiling and also set the PARTIAL
> * flag to indicate that the last record is corrupted.
> */
> - if (pmbsr & BIT(SYS_PMBSR_EL1_DL_SHIFT))
> + if (pmbsr & BIT(PMBSR_EL1_DL_SHIFT))
> perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED |
> PERF_AUX_FLAG_PARTIAL);
>
> /* Report collisions to userspace so that it can up the period */
> - if (pmbsr & BIT(SYS_PMBSR_EL1_COLL_SHIFT))
> + if (pmbsr & BIT(PMBSR_EL1_COLL_SHIFT))
> perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION);
>
> /* We only expect buffer management events */
> - switch (pmbsr & (SYS_PMBSR_EL1_EC_MASK << SYS_PMBSR_EL1_EC_SHIFT)) {
> - case SYS_PMBSR_EL1_EC_BUF:
> + switch (FIELD_GET(PMBSR_EL1_EC_MASK, pmbsr)) {
> + case PMBSR_EL1_EC_BUF:
> /* Handled below */
> break;
> - case SYS_PMBSR_EL1_EC_FAULT_S1:
> - case SYS_PMBSR_EL1_EC_FAULT_S2:
> + case PMBSR_EL1_EC_FAULT_S1:
> + case PMBSR_EL1_EC_FAULT_S2:
> err_str = "Unexpected buffer fault";
> goto out_err;
> default:
> @@ -600,9 +600,8 @@ arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle)
> }
>
> /* Buffer management event */
> - switch (pmbsr &
> - (SYS_PMBSR_EL1_BUF_BSC_MASK << SYS_PMBSR_EL1_BUF_BSC_SHIFT)) {
> - case SYS_PMBSR_EL1_BUF_BSC_FULL:
> + switch (FIELD_GET(PMBSR_EL1_BUF_BSC_MASK, pmbsr)) {
> + case PMBSR_EL1_BUF_BSC_FULL:
> ret = SPE_PMU_BUF_FAULT_ACT_OK;
> goto out_stop;
> default:
> @@ -717,23 +716,23 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
> return -EINVAL;
>
> reg = arm_spe_event_to_pmsfcr(event);
> - if ((reg & BIT(SYS_PMSFCR_EL1_FE_SHIFT)) &&
> + if ((reg & BIT(PMSFCR_EL1_FE_SHIFT)) &&
> !(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT))
> return -EOPNOTSUPP;
>
> - if ((reg & BIT(SYS_PMSFCR_EL1_FT_SHIFT)) &&
> + if ((reg & BIT(PMSFCR_EL1_FT_SHIFT)) &&
> !(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP))
> return -EOPNOTSUPP;
>
> - if ((reg & BIT(SYS_PMSFCR_EL1_FL_SHIFT)) &&
> + if ((reg & BIT(PMSFCR_EL1_FL_SHIFT)) &&
> !(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
> return -EOPNOTSUPP;
>
> set_spe_event_has_cx(event);
> reg = arm_spe_event_to_pmscr(event);
> if (!perfmon_capable() &&
> - (reg & (BIT(SYS_PMSCR_EL1_PA_SHIFT) |
> - BIT(SYS_PMSCR_EL1_PCT_SHIFT))))
> + (reg & (BIT(PMSCR_EL1_PA_SHIFT) |
> + BIT(PMSCR_EL1_PCT_SHIFT))))
> return -EACCES;
>
> return 0;
> @@ -971,14 +970,14 @@ static void __arm_spe_pmu_dev_probe(void *info)
>
> /* Read PMBIDR first to determine whether or not we have access */
> reg = read_sysreg_s(SYS_PMBIDR_EL1);
> - if (reg & BIT(SYS_PMBIDR_EL1_P_SHIFT)) {
> + if (reg & BIT(PMBIDR_EL1_P_SHIFT)) {
> dev_err(dev,
> "profiling buffer owned by higher exception level\n");
> return;
> }
>
> /* Minimum alignment. If it's out-of-range, then fail the probe */
> - fld = reg >> SYS_PMBIDR_EL1_ALIGN_SHIFT & SYS_PMBIDR_EL1_ALIGN_MASK;
> + fld = (reg & PMBIDR_EL1_ALIGN_MASK) >> PMBIDR_EL1_ALIGN_SHIFT;
> spe_pmu->align = 1 << fld;
> if (spe_pmu->align > SZ_2K) {
> dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n",
> @@ -988,26 +987,26 @@ static void __arm_spe_pmu_dev_probe(void *info)
>
> /* It's now safe to read PMSIDR and figure out what we've got */
> reg = read_sysreg_s(SYS_PMSIDR_EL1);
> - if (reg & BIT(SYS_PMSIDR_EL1_FE_SHIFT))
> + if (reg & BIT(PMSIDR_EL1_FE_SHIFT))
> spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT;
>
> - if (reg & BIT(SYS_PMSIDR_EL1_FT_SHIFT))
> + if (reg & BIT(PMSIDR_EL1_FT_SHIFT))
> spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP;
>
> - if (reg & BIT(SYS_PMSIDR_EL1_FL_SHIFT))
> + if (reg & BIT(PMSIDR_EL1_FL_SHIFT))
> spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT;
>
> - if (reg & BIT(SYS_PMSIDR_EL1_ARCHINST_SHIFT))
> + if (reg & BIT(PMSIDR_EL1_ARCHINST_SHIFT))
> spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST;
>
> - if (reg & BIT(SYS_PMSIDR_EL1_LDS_SHIFT))
> + if (reg & BIT(PMSIDR_EL1_LDS_SHIFT))
> spe_pmu->features |= SPE_PMU_FEAT_LDS;
>
> - if (reg & BIT(SYS_PMSIDR_EL1_ERND_SHIFT))
> + if (reg & BIT(PMSIDR_EL1_ERND_SHIFT))
> spe_pmu->features |= SPE_PMU_FEAT_ERND;
>
> /* This field has a spaced out encoding, so just use a look-up */
> - fld = reg >> SYS_PMSIDR_EL1_INTERVAL_SHIFT & SYS_PMSIDR_EL1_INTERVAL_MASK;
> + fld = (reg & PMSIDR_EL1_INTERVAL_MASK) >> PMSIDR_EL1_INTERVAL_SHIFT;
> switch (fld) {
> case 0:
> spe_pmu->min_period = 256;
> @@ -1039,7 +1038,7 @@ static void __arm_spe_pmu_dev_probe(void *info)
> }
>
> /* Maximum record size. If it's out-of-range, then fail the probe */
> - fld = reg >> SYS_PMSIDR_EL1_MAXSIZE_SHIFT & SYS_PMSIDR_EL1_MAXSIZE_MASK;
> + fld = (reg & PMSIDR_EL1_MAXSIZE_MASK) >> PMSIDR_EL1_MAXSIZE_SHIFT;
> spe_pmu->max_record_sz = 1 << fld;
> if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) {
> dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n",
> @@ -1047,7 +1046,7 @@ static void __arm_spe_pmu_dev_probe(void *info)
> return;
> }
>
> - fld = reg >> SYS_PMSIDR_EL1_COUNTSIZE_SHIFT & SYS_PMSIDR_EL1_COUNTSIZE_MASK;
> + fld = (reg & PMSIDR_EL1_COUNTSIZE_MASK) >> PMSIDR_EL1_COUNTSIZE_SHIFT;
> switch (fld) {
> default:
> dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n",
>
With or without those changes
Reviewed-by: Anshuman Khandual <anshuman.khandual at arm.com>
More information about the linux-arm-kernel
mailing list