[PATCH 3/5] ARM: dts: hpe: Add SROM Driver

[clayc at hpe.com]

From: Clay Chang <clayc at hpe.com>

Add SROM driver to the device tree. Also re-organize the AHB base
address to accommodate the SROM driver register requirements. Add the
hpe,gxp-srom compatible.

Signed-off-by: Clay Chang <clayc at hpe.com>
---
 arch/arm/boot/dts/hpe-gxp.dtsi | 41 +++++++++++++++++++---------------
 1 file changed, 23 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
index cf735b3c4f35..3e96941721d5 100644
--- a/arch/arm/boot/dts/hpe-gxp.dtsi
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -52,76 +52,81 @@
 			cache-level = <2>;
 		};
 
-		ahb at c0000000 {
+		ahb at 80000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0xc0000000 0x30000000>;
+			ranges = <0x0 0x80000000 0x7FFFFFFF>;
 			dma-ranges;
 
-			vic0: interrupt-controller at eff0000 {
+			vic0: interrupt-controller at 4eff0000 {
 				compatible = "arm,pl192-vic";
-				reg = <0xeff0000 0x1000>;
+				reg = <0x4eff0000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			vic1: interrupt-controller at 80f00000 {
+			vic1: interrupt-controller at f00000 {
 				compatible = "arm,pl192-vic";
-				reg = <0x80f00000 0x1000>;
+				reg = <0xf00000 0x1000>;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 
-			uarta: serial at e0 {
+			uarta: serial at 400000e0 {
 				compatible = "ns16550a";
-				reg = <0xe0 0x8>;
+				reg = <0x400000e0 0x8>;
 				interrupts = <17>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartb: serial at e8 {
+			uartb: serial at 400000e8 {
 				compatible = "ns16550a";
-				reg = <0xe8 0x8>;
+				reg = <0x400000e8 0x8>;
 				interrupts = <18>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			uartc: serial at f0 {
+			uartc: serial at 400000f0 {
 				compatible = "ns16550a";
-				reg = <0xf0 0x8>;
+				reg = <0x400000f0 0x8>;
 				interrupts = <19>;
 				interrupt-parent = <&vic0>;
 				clock-frequency = <1846153>;
 				reg-shift = <0>;
 			};
 
-			usb0: usb at efe0000 {
+			usb0: usb at 4efe0000 {
 				compatible = "hpe,gxp-ehci", "generic-ehci";
-				reg = <0xefe0000 0x100>;
+				reg = <0x4efe0000 0x100>;
 				interrupts = <7>;
 				interrupt-parent = <&vic0>;
 			};
 
-			st: timer at 80 {
+			st: timer at 40000080 {
 				compatible = "hpe,gxp-timer";
-				reg = <0x80 0x16>;
+				reg = <0x40000080 0x16>;
 				interrupts = <0>;
 				interrupt-parent = <&vic0>;
 				clocks = <&iopclk>;
 				clock-names = "iop";
 			};
 
-			usb1: usb at efe0100 {
+			usb1: usb at 4efe0100 {
 				compatible = "hpe,gxp-ohci", "generic-ohci";
-				reg = <0xefe0100 0x110>;
+				reg = <0x4efe0100 0x110>;
 				interrupts = <6>;
 				interrupt-parent = <&vic0>;
 			};
+
+			srom: srom at fc0000 {
+				compatible = "hpe,gxp-srom";
+				reg = <0xfc0000 0x100>;
+			};
 		};
 	};
 };
-- 
2.17.1