[PATCH 0/5] ARM: Add GXP SROM Support

[clayc at hpe.com]

From: Clay Chang <clayc at hpe.com>

The GXP SROM control register can be used to configure LPC related
legacy I/O registers. Currently only the SROM RAM Offset Register
(vromoff) is exported.

Clay Chang (5):
  soc: hpe: Add GXP SROM Control Register Driver
  dt-bindings: soc: hpe: hpe,gxp-srom.yaml
  ARM: dts: hpe: Add SROM Driver
  ARM: multi_v7_defconfig: Add GXP SROM Driver
  MAINTAINERS: Add maintainer of GXP SROM support

 .../bindings/soc/hpe/hpe,gxp-srom.yaml        |  36 +++++
 MAINTAINERS                                   |   8 +
 arch/arm/boot/dts/hpe-gxp.dtsi                |  41 ++---
 arch/arm/configs/multi_v7_defconfig           |   2 +
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/hpe/Kconfig                       |  29 ++++
 drivers/soc/hpe/Makefile                      |   2 +
 drivers/soc/hpe/gxp-soclib.c                  |  17 +++
 drivers/soc/hpe/gxp-soclib.h                  |   9 ++
 drivers/soc/hpe/gxp-srom.c                    | 141 ++++++++++++++++++
 11 files changed, 269 insertions(+), 18 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/hpe/hpe,gxp-srom.yaml
 create mode 100644 drivers/soc/hpe/Kconfig
 create mode 100644 drivers/soc/hpe/Makefile
 create mode 100644 drivers/soc/hpe/gxp-soclib.c
 create mode 100644 drivers/soc/hpe/gxp-soclib.h
 create mode 100644 drivers/soc/hpe/gxp-srom.c

-- 
2.17.1