[PATCH net-next v3 07/11] net: mdio: mvmdio: Convert XSMI bus to new API
Michael Walle
michael at walle.cc
Mon Jan 9 07:30:47 PST 2023
From: Andrew Lunn <andrew at lunn.ch>
The marvell MDIO driver supports two different hardware blocks. The
XSMI block is C45 only. Convert this block to the new API, and only
populate the c45 calls in the bus structure.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Michael Walle <michael at walle.cc>
---
drivers/net/ethernet/marvell/mvmdio.c | 24 ++++++++----------------
1 file changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index ef878973b859..2d654a40af13 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -204,21 +204,17 @@ static const struct orion_mdio_ops orion_mdio_xsmi_ops = {
.poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX,
};
-static int orion_mdio_xsmi_read(struct mii_bus *bus, int mii_id,
- int regnum)
+static int orion_mdio_xsmi_read_c45(struct mii_bus *bus, int mii_id,
+ int dev_addr, int regnum)
{
struct orion_mdio_dev *dev = bus->priv;
- u16 dev_addr = (regnum >> 16) & GENMASK(4, 0);
int ret;
- if (!(regnum & MII_ADDR_C45))
- return -EOPNOTSUPP;
-
ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus);
if (ret < 0)
return ret;
- writel(regnum & GENMASK(15, 0), dev->regs + MVMDIO_XSMI_ADDR_REG);
+ writel(regnum, dev->regs + MVMDIO_XSMI_ADDR_REG);
writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) |
(dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) |
MVMDIO_XSMI_READ_OPERATION,
@@ -237,21 +233,17 @@ static int orion_mdio_xsmi_read(struct mii_bus *bus, int mii_id,
return readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & GENMASK(15, 0);
}
-static int orion_mdio_xsmi_write(struct mii_bus *bus, int mii_id,
- int regnum, u16 value)
+static int orion_mdio_xsmi_write_c45(struct mii_bus *bus, int mii_id,
+ int dev_addr, int regnum, u16 value)
{
struct orion_mdio_dev *dev = bus->priv;
- u16 dev_addr = (regnum >> 16) & GENMASK(4, 0);
int ret;
- if (!(regnum & MII_ADDR_C45))
- return -EOPNOTSUPP;
-
ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus);
if (ret < 0)
return ret;
- writel(regnum & GENMASK(15, 0), dev->regs + MVMDIO_XSMI_ADDR_REG);
+ writel(regnum, dev->regs + MVMDIO_XSMI_ADDR_REG);
writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) |
(dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) |
MVMDIO_XSMI_WRITE_OPERATION | value,
@@ -302,8 +294,8 @@ static int orion_mdio_probe(struct platform_device *pdev)
bus->write = orion_mdio_smi_write;
break;
case BUS_TYPE_XSMI:
- bus->read = orion_mdio_xsmi_read;
- bus->write = orion_mdio_xsmi_write;
+ bus->read_c45 = orion_mdio_xsmi_read_c45;
+ bus->write_c45 = orion_mdio_xsmi_write_c45;
break;
}
--
2.30.2
More information about the linux-arm-kernel
mailing list