[PATCH v1 2/4] ARM: dts: colibri-imx6ull: improve wake-up with gpio key

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

The pin GPIO5_IO01 externally pulls down, it is required to sequentially
connect this pin (signal WAKE_MICO#) to +3v3 and then disconnect it to
trigger a wakeup interrupt.
Adding the flag GPIO_PULL_DOWN allows the system to be woken up just
connecting the pin GPIO5_IO01 to +3v3.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

 arch/arm/boot/dts/imx6ull-colibri.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 336ab2e0534c..368d11ae7a8a 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -53,7 +53,7 @@ gpio-keys {
 
 		wakeup {
 			debounce-interval = <10>;
-			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+			gpios = <&gpio5 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
 			label = "Wake-Up";
 			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
-- 
2.35.1