[PATCH v2] usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail

cy_huang at richtek.com cy_huang at richtek.com
Sun Jan 8 17:34:52 PST 2023


From: ChiYuan Huang <cy_huang at richtek.com>

There's the altmode re-registeration issue after data role
swap (DR_SWAP).

Comparing to USBPD 2.0, in USBPD 3.0, it loose the limit that only DFP
can initiate the VDM command to get partner identity information.

For a USBPD 3.0 UFP device, it may already get the identity information
from its port partner before DR_SWAP. If DR_SWAP send or receive at the
mean time, 'send_discover' flag will be raised again. It causes discover
identify action restart while entering ready state. And after all
discover actions are done, the 'tcpm_register_altmodes' will be called.
If old altmode is not unregistered, this sysfs create fail can be found.

In 'DR_SWAP_CHANGE_DR' state case, only DFP will unregister altmodes.
For UFP, the original altmodes keep registered.

This patch fix the logic that after DR_SWAP, 'tcpm_unregister_altmodes'
must be called whatever the current data role is.

Reviewed-by: Macpaul Lin <macpaul.lin at mediatek.com>
Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together)
Reported-by: TommyYl Chen <tommyyl.chen at mediatek.com>
Cc: stable at vger.kernel.org
Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>
---
Since v2:
1. Correct the mail sent from Richtek.
2. Add 'Reviewed-by' tag.

---
 drivers/usb/typec/tcpm/tcpm.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 904c7b4..59b366b 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -4594,14 +4594,13 @@ static void run_state_machine(struct tcpm_port *port)
                tcpm_set_state(port, ready_state(port), 0);
                break;
        case DR_SWAP_CHANGE_DR:
-               if (port->data_role == TYPEC_HOST) {
-                       tcpm_unregister_altmodes(port);
+               tcpm_unregister_altmodes(port);
+               if (port->data_role == TYPEC_HOST)
                        tcpm_set_roles(port, true, port->pwr_role,
                                       TYPEC_DEVICE);
-               } else {
+               else
                        tcpm_set_roles(port, true, port->pwr_role,
                                       TYPEC_HOST);
-               }
                tcpm_ams_finish(port);
                tcpm_set_state(port, ready_state(port), 0);
                break;
--
2.7.4

************* Email Confidentiality Notice ********************

The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you!



More information about the linux-arm-kernel mailing list