[PATCH 2/2] soc: sunxi: Add Allwinner D1 PPU driver
Jernej Škrabec
jernej.skrabec at gmail.com
Thu Jan 5 08:38:07 PST 2023
Dne sobota, 31. december 2022 ob 17:04:02 CET je Samuel Holland napisal(a):
> The PPU contains a series of identical MMIO register ranges, one for
> each power domain. Each range contains control/status bits for a clock
> gate, reset line, output gates, and a power switch. (The clock and reset
> are separate from, and in addition to, the bits in the CCU.) It also
> contains a hardware power sequence engine to control the other bits.
>
> Signed-off-by: Samuel Holland <samuel at sholland.org>
> ---
>
> drivers/soc/sunxi/Kconfig | 9 ++
> drivers/soc/sunxi/Makefile | 1 +
> drivers/soc/sunxi/sun20i-ppu.c | 207 +++++++++++++++++++++++++++++++++
> 3 files changed, 217 insertions(+)
> create mode 100644 drivers/soc/sunxi/sun20i-ppu.c
>
> diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
> index 8aecbc9b1976..5e84cf4b8510 100644
> --- a/drivers/soc/sunxi/Kconfig
> +++ b/drivers/soc/sunxi/Kconfig
> @@ -19,3 +19,12 @@ config SUNXI_SRAM
> Say y here to enable the SRAM controller support. This
> device is responsible on mapping the SRAM in the sunXi SoCs
> whether to the CPU/DMA, or to the devices.
> +
> +config SUN20I_PPU
> + bool "Allwinner D1 PPU power domain driver"
> + depends on ARCH_SUNXI || COMPILE_TEST
> + select PM_GENERIC_DOMAINS
> + help
> + Say y to enable the PPU power domain driver. This saves power
> + when certain peripherals, such as the video engine, are idle.
> + All power domains are on by default, so this is optional.
If this driver will gain support for other SoCs, above statement might not be
true anymore. One such example is GPU on H616 (if PPU is compatible).
Other than that, driver looks good:
Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>
Best regards,
Jernej
> diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
> index 549159571d4f..90ff2ebe7655 100644
> --- a/drivers/soc/sunxi/Makefile
> +++ b/drivers/soc/sunxi/Makefile
> @@ -1,3 +1,4 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_SUNXI_MBUS) += sunxi_mbus.o
> obj-$(CONFIG_SUNXI_SRAM) += sunxi_sram.o
> +obj-$(CONFIG_SUN20I_PPU) += sun20i-ppu.o
> diff --git a/drivers/soc/sunxi/sun20i-ppu.c b/drivers/soc/sunxi/sun20i-ppu.c
> new file mode 100644
> index 000000000000..98cb41d36560
> --- /dev/null
> +++ b/drivers/soc/sunxi/sun20i-ppu.c
> @@ -0,0 +1,207 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +#include <linux/bitfield.h>
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/reset.h>
> +
> +#define PD_STATE_ON 1
> +#define PD_STATE_OFF 2
> +
> +#define PD_RSTN_REG 0x00
> +#define PD_CLK_GATE_REG 0x04
> +#define PD_PWROFF_GATE_REG 0x08
> +#define PD_PSW_ON_REG 0x0c
> +#define PD_PSW_OFF_REG 0x10
> +#define PD_PSW_DELAY_REG 0x14
> +#define PD_OFF_DELAY_REG 0x18
> +#define PD_ON_DELAY_REG 0x1c
> +#define PD_COMMAND_REG 0x20
> +#define PD_STATUS_REG 0x24
> +#define PD_STATUS_COMPLETE BIT(1)
> +#define PD_STATUS_BUSY BIT(3)
> +#define PD_STATUS_STATE
GENMASK(17, 16)
> +#define PD_ACTIVE_CTRL_REG 0x2c
> +#define PD_GATE_STATUS_REG 0x30
> +#define PD_RSTN_STATUS BIT(0)
> +#define PD_CLK_GATE_STATUS BIT(1)
> +#define PD_PWROFF_GATE_STATUS BIT(2)
> +#define PD_PSW_STATUS_REG 0x34
> +
> +#define PD_REGS_SIZE 0x80
> +
> +struct sun20i_ppu_desc {
> + const char *const *names;
> + unsigned int num_domains;
> +};
> +
> +struct sun20i_ppu_pd {
> + struct generic_pm_domain genpd;
> + void __iomem *base;
> +};
> +
> +#define to_sun20i_ppu_pd(_genpd) \
> + container_of(_genpd, struct sun20i_ppu_pd, genpd)
> +
> +static bool sun20i_ppu_pd_is_on(const struct sun20i_ppu_pd *pd)
> +{
> + u32 status = readl(pd->base + PD_STATUS_REG);
> +
> + return FIELD_GET(PD_STATUS_STATE, status) == PD_STATE_ON;
> +}
> +
> +static int sun20i_ppu_pd_set_power(const struct sun20i_ppu_pd *pd, bool
> power_on) +{
> + u32 state, status;
> + int ret;
> +
> + if (sun20i_ppu_pd_is_on(pd) == power_on)
> + return 0;
> +
> + /* Wait for the power controller to be idle. */
> + ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
> + !(status & PD_STATUS_BUSY), 100,
1000);
> + if (ret)
> + return ret;
> +
> + state = power_on ? PD_STATE_ON : PD_STATE_OFF;
> + writel(state, pd->base + PD_COMMAND_REG);
> +
> + /* Wait for the state transition to complete. */
> + ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
> + FIELD_GET(PD_STATUS_STATE,
status) == state &&
> + (status & PD_STATUS_COMPLETE),
100, 1000);
> + if (ret)
> + return ret;
> +
> + /* Clear the completion flag. */
> + writel(status, pd->base + PD_STATUS_REG);
> +
> + return 0;
> +}
> +
> +static int sun20i_ppu_pd_power_on(struct generic_pm_domain *genpd)
> +{
> + const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
> +
> + return sun20i_ppu_pd_set_power(pd, true);
> +}
> +
> +static int sun20i_ppu_pd_power_off(struct generic_pm_domain *genpd)
> +{
> + const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
> +
> + return sun20i_ppu_pd_set_power(pd, false);
> +}
> +
> +static int sun20i_ppu_probe(struct platform_device *pdev)
> +{
> + const struct sun20i_ppu_desc *desc;
> + struct device *dev = &pdev->dev;
> + struct genpd_onecell_data *ppu;
> + struct sun20i_ppu_pd *pds;
> + struct reset_control *rst;
> + void __iomem *base;
> + struct clk *clk;
> + int ret;
> +
> + desc = of_device_get_match_data(dev);
> + if (!desc)
> + return -EINVAL;
> +
> + pds = devm_kcalloc(dev, desc->num_domains, sizeof(*pds),
GFP_KERNEL);
> + if (!pds)
> + return -ENOMEM;
> +
> + ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
> + if (!ppu)
> + return -ENOMEM;
> +
> + ppu->domains = devm_kcalloc(dev, desc->num_domains,
> + sizeof(*ppu->domains),
GFP_KERNEL);
> + if (!ppu->domains)
> + return -ENOMEM;
> +
> + ppu->num_domains = desc->num_domains;
> + platform_set_drvdata(pdev, ppu);
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + clk = devm_clk_get_enabled(dev, NULL);
> + if (IS_ERR(clk))
> + return PTR_ERR(clk);
> +
> + rst = devm_reset_control_get_exclusive(dev, NULL);
> + if (IS_ERR(rst))
> + return PTR_ERR(rst);
> +
> + ret = reset_control_deassert(rst);
> + if (ret)
> + return ret;
> +
> + for (unsigned int i = 0; i < ppu->num_domains; ++i) {
> + struct sun20i_ppu_pd *pd = &pds[i];
> +
> + pd->genpd.name = desc->names[i];
> + pd->genpd.power_off = sun20i_ppu_pd_power_off;
> + pd->genpd.power_on = sun20i_ppu_pd_power_on;
> + pd->base = base + PD_REGS_SIZE * i;
> +
> + ret = pm_genpd_init(&pd->genpd, NULL,
sun20i_ppu_pd_is_on(pd));
> + if (ret) {
> + dev_warn(dev, "Failed to add '%s' domain:
%d\n",
> + pd->genpd.name, ret);
> + continue;
> + }
> +
> + ppu->domains[i] = &pd->genpd;
> + }
> +
> + ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
> + if (ret)
> + dev_warn(dev, "Failed to add provider: %d\n", ret);
> +
> + return 0;
> +}
> +
> +static const char *const sun20i_d1_ppu_pd_names[] = {
> + "CPU",
> + "VE",
> + "DSP",
> +};
> +
> +static const struct sun20i_ppu_desc sun20i_d1_ppu_desc = {
> + .names = sun20i_d1_ppu_pd_names,
> + .num_domains = ARRAY_SIZE(sun20i_d1_ppu_pd_names),
> +};
> +
> +static const struct of_device_id sun20i_ppu_of_match[] = {
> + {
> + .compatible = "allwinner,sun20i-d1-ppu",
> + .data = &sun20i_d1_ppu_desc,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, sun20i_ppu_of_match);
> +
> +static struct platform_driver sun20i_ppu_driver = {
> + .probe = sun20i_ppu_probe,
> + .driver = {
> + .name = "sun20i-ppu",
> + .of_match_table =
sun20i_ppu_of_match,
> + /* Power domains cannot be removed while they are in
use. */
> + .suppress_bind_attrs = true,
> + },
> +};
> +module_platform_driver(sun20i_ppu_driver);
> +
> +MODULE_AUTHOR("Samuel Holland <samuel at sholland.org>");
> +MODULE_DESCRIPTION("Allwinner D1 PPU power domain driver");
> +MODULE_LICENSE("GPL");
More information about the linux-arm-kernel
mailing list