[PATCH 09/10] serial: Make uart_handle_cts_change() status param bool

[Ilpo Järvinen]

Convert uart_handle_cts_change() to bool which is more appropriate
than unsigned int.

Cleanup callsites from operations that are not necessary with bool.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen at linux.intel.com>
---
 drivers/tty/serial/imx.c         | 2 +-
 drivers/tty/serial/max3100.c     | 2 +-
 drivers/tty/serial/max310x.c     | 3 +--
 drivers/tty/serial/serial_core.c | 4 ++--
 include/linux/serial_core.h      | 3 +--
 5 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 757825edb0cd..07850a9cde61 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -771,7 +771,7 @@ static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id)
 
 	imx_uart_writel(sport, USR1_RTSD, USR1);
 	usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS;
-	uart_handle_cts_change(&sport->port, !!usr1);
+	uart_handle_cts_change(&sport->port, usr1);
 	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
 	return IRQ_HANDLED;
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index bb74f23251fe..86dcbff8faa3 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -247,7 +247,7 @@ static int max3100_handlerx(struct max3100_port *s, u16 rx)
 	cts = (rx & MAX3100_CTS) > 0;
 	if (s->cts != cts) {
 		s->cts = cts;
-		uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0);
+		uart_handle_cts_change(&s->port, cts);
 	}
 
 	return ret;
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 4eb24e3407f8..e9cacfe7e032 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -819,8 +819,7 @@ static irqreturn_t max310x_port_irq(struct max310x_port *s, int portno)
 
 		if (ists & MAX310X_IRQ_CTS_BIT) {
 			lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
-			uart_handle_cts_change(port,
-					       !!(lsr & MAX310X_LSR_CTS_BIT));
+			uart_handle_cts_change(port, lsr & MAX310X_LSR_CTS_BIT);
 		}
 		if (rxlen)
 			max310x_handle_rx(port, rxlen);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 76536c74e907..35fff37e42bb 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -3285,11 +3285,11 @@ EXPORT_SYMBOL_GPL(uart_handle_dcd_change);
 /**
  * uart_handle_cts_change - handle a change of clear-to-send state
  * @uport: uart_port structure for the open port
- * @status: new clear to send status, nonzero if active
+ * @status: new clear to send status, true if active
  *
  * Caller must hold uport->lock.
  */
-void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
+void uart_handle_cts_change(struct uart_port *uport, bool status)
 {
 	lockdep_assert_held_once(&uport->lock);
 
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f1b69a36bb2b..591224505cb4 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -897,8 +897,7 @@ static inline bool uart_softcts_mode(struct uart_port *uport)
  */
 
 extern void uart_handle_dcd_change(struct uart_port *uport, bool status);
-extern void uart_handle_cts_change(struct uart_port *uport,
-		unsigned int status);
+extern void uart_handle_cts_change(struct uart_port *uport, bool status);
 
 extern void uart_insert_char(struct uart_port *port, unsigned int status,
 		 unsigned int overrun, unsigned int ch, unsigned int flag);
-- 
2.30.2