[PATCH v3 2/2] ARM: dts: tqma6ul + mba6ulx: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
Changes in v3:
* Squashed into a single patch

 arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi | 4 ++--
 arch/arm/boot/dts/mba6ulx.dtsi               | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
index eca94ed6451b..57e647fc3237 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -116,8 +116,8 @@ reg_vldo4: vldo4 {
 		};
 	};
 
-	jc42_1a: eeprom-temperature-sensor at 1a {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	jc42_1a: eeprom-temperature at 1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1a>;
 	};
 
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
index b8e576ab8860..d08f525acfe5 100644
--- a/arch/arm/boot/dts/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -229,7 +229,7 @@ tlv320aic32x4: audio-codec at 18 {
 	};
 
 	jc42: temperature-sensor at 19 {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x19>;
 	};
 
-- 
2.34.1