[PATCH v2 2/2] ARM: dts: imx6ul-tqma6ul: Fix temperature sensor compatible

[Alexander Stein]

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
Changes in v2:
* Split into arm-only series

 arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
index eca94ed6451b..57e647fc3237 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -116,8 +116,8 @@ reg_vldo4: vldo4 {
 		};
 	};
 
-	jc42_1a: eeprom-temperature-sensor at 1a {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	jc42_1a: eeprom-temperature at 1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1a>;
 	};
 
-- 
2.34.1