[PATCH] dt-bindings: clock: imx8m: add interrupts property

[Peng Fan]

> Subject: RE: [PATCH] dt-bindings: clock: imx8m: add interrupts property
> 
> > Subject: [PATCH] dt-bindings: clock: imx8m: add interrupts property
> >
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > Since the CCM module could trigger interrupt, so add interrupts
> > property for i.MX8M.
> >
> 
> Any chance that these interrupt will be used? More likely such interrupt are
> useless and has no details about how to use it in RM, just piece of words in
> the interrupt table.

This is to clear the System-Ready check warning. This is to describe
the hardware. Since device tree already has it, and the hardware
indeed supports interrupt, so let's add it.

Thanks,
Peng.
> 
> BR
> 
> > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > ---
> >  Documentation/devicetree/bindings/clock/imx8m-clock.yaml | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> > b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> > index 0dbc1433fede..ac7ad8459c79 100644
> > --- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> > +++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
> > @@ -39,6 +39,10 @@ properties:
> >        ID in its "clocks" phandle cell. See
> > include/dt-bindings/clock/imx8m-clock.h
> >        for the full list of i.MX8M clock IDs.
> >
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +
> >  required:
> >    - compatible
> >    - reg
> > --
> > 2.37.1