[PATCH v6 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK
Peng Fan
peng.fan at oss.nxp.com
Tue Feb 28 18:36:26 PST 2023
On 3/1/2023 5:57 AM, Marek Vasut wrote:
> Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
> This is all that is needed to get analog audio output operational
> on i.MX8MP EVK.
>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> Signed-off-by: Marek Vasut <marex at denx.de>
Acked-by: Peng Fan <peng.fan at nxp.com>
> ---
> Cc: Abel Vesa <abelvesa at kernel.org>
> Cc: Alexander Stein <alexander.stein at ew.tq-group.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Jacky Bai <ping.bai at nxp.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Cc: Luca Ceresoli <luca.ceresoli at bootlin.com>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: Marco Felsch <m.felsch at pengutronix.de>
> Cc: Michael Turquette <mturquette at baylibre.com>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
> Cc: Richard Cochran <richardcochran at gmail.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: Stephen Boyd <sboyd at kernel.org>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-clk at vger.kernel.org
> ---
> V2: No change
> V3: No change
> V4: - Update codec node name and phandle label
> - Use just sound for the sound node name
> - Rebase on next 20230223
> V5: - Drop regulator-always-on from codec regulator
> - Add RB from Fabio
> - TB by Alexander added and removed again, since the patch was reworked
> - Switch to simple-audio-card
> - Add sound-dai-cells to codec node
> V6: - Split off separate pinctrl for regulator
> - Drop unused SAI3_RXFS pinmux
> ---
> arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 80 ++++++++++++++++++++
> 1 file changed, 80 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 7816853162b3f..fa37ce89f8d3d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -40,6 +40,17 @@ pcie0_refclk: pcie0-refclk {
> clock-frequency = <100000000>;
> };
>
> + reg_audio_pwr: regulator-audio-pwr {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audio_pwr_reg>;
> + regulator-name = "audio-pwr";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> reg_can1_stby: regulator-can1-stby {
> compatible = "regulator-fixed";
> regulator-name = "can1-stby";
> @@ -83,6 +94,37 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> enable-active-high;
> };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "wm8960-audio";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&cpudai>;
> + simple-audio-card,bitclock-master = <&cpudai>;
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack",
> + "Speaker", "External Speaker",
> + "Microphone", "Mic Jack";
> + simple-audio-card,routing =
> + "Headphone Jack", "HP_L",
> + "Headphone Jack", "HP_R",
> + "External Speaker", "SPK_LP",
> + "External Speaker", "SPK_LN",
> + "External Speaker", "SPK_RP",
> + "External Speaker", "SPK_RN",
> + "LINPUT1", "Mic Jack",
> + "LINPUT3", "Mic Jack",
> + "Mic Jack", "MICB";
> +
> + cpudai: simple-audio-card,cpu {
> + sound-dai = <&sai3>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&wm8960>;
> + };
> +
> + };
> };
>
> &flexspi {
> @@ -344,6 +386,18 @@ &i2c3 {
> pinctrl-0 = <&pinctrl_i2c3>;
> status = "okay";
>
> + wm8960: codec at 1a {
> + compatible = "wlf,wm8960";
> + reg = <0x1a>;
> + #sound-dai-cells = <0>;
> + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
> + clock-names = "mclk";
> + wlf,shared-lrclk;
> + wlf,hp-cfg = <3 2 3>;
> + wlf,gpio-cfg = <1 3>;
> + SPKVDD1-supply = <®_audio_pwr>;
> + };
> +
> pca6416: gpio at 20 {
> compatible = "ti,tca6416";
> reg = <0x20>;
> @@ -422,6 +476,16 @@ &pwm4 {
> status = "okay";
> };
>
> +&sai3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai3>;
> + assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
> + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <12288000>;
> + fsl,sai-mclk-direction-output;
> + status = "okay";
> +};
> +
> &snvs_pwrkey {
> status = "okay";
> };
> @@ -499,6 +563,12 @@ &wdog1 {
> };
>
> &iomuxc {
> + pinctrl_audio_pwr_reg: audiopwrreggrp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0xd6
> + >;
> + };
> +
> pinctrl_eqos: eqosgrp {
> fsl,pins = <
> MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
> @@ -668,6 +738,16 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS 0x140
> >;
> };
>
> + pinctrl_sai3: sai3grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0xd6
> + MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6
> + MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6
> + MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6
> + MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6
> + >;
> + };
> +
> pinctrl_uart2: uart2grp {
> fsl,pins = <
> MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
More information about the linux-arm-kernel
mailing list