[PATCH 7/9] dt-bindings: crypto: drop fsl-sec4 txt binding
Peng Fan (OSS)
peng.fan at oss.nxp.com
Tue Feb 28 17:57:00 PST 2023
From: Peng Fan <peng.fan at nxp.com>
Since we have convert it to two DT schema, fsl-sec4.yaml and
fsl-sec4-snvs.yaml, this txt binding could be removed.
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
.../devicetree/bindings/crypto/fsl-sec4.txt | 553 ------------------
1 file changed, 553 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/crypto/fsl-sec4.txt
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
deleted file mode 100644
index 8f359f473ada..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ /dev/null
@@ -1,553 +0,0 @@
-=====================================================================
-SEC 4 Device Tree Binding
-Copyright (C) 2008-2011 Freescale Semiconductor Inc.
-
- CONTENTS
- -Overview
- -SEC 4 Node
- -Job Ring Node
- -Run Time Integrity Check (RTIC) Node
- -Run Time Integrity Check (RTIC) Memory Node
- -Secure Non-Volatile Storage (SNVS) Node
- -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
- -Full Example
-
-NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
-Accelerator and Assurance Module (CAAM).
-
-=====================================================================
-Overview
-
-DESCRIPTION
-
-SEC 4 h/w can process requests from 2 types of sources.
-1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
-2. Job Rings (HW interface between cores & SEC 4 registers).
-
-High Speed Data Path Configuration:
-
-HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
-such as the P4080. The number of simultaneous dequeues the QI can make is
-equal to the number of Descriptor Controller (DECO) engines in a particular
-SEC version. E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
-dequeue from 5 subportals simultaneously.
-
-Job Ring Data Path Configuration:
-
-Each JR is located on a separate 4k page, they may (or may not) be made visible
-in the memory partition devoted to a particular core. The P4080 has 4 JRs, so
-up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
-
-=====================================================================
-SEC 4 Node
-
-Description
-
- Node defines the base address of the SEC 4 block.
- This block specifies the address range of all global
- configuration registers for the SEC 4 block. It
- also receives interrupts from the Run Time Integrity Check
- (RTIC) function within the SEC 4 block.
-
-PROPERTIES
-
- - compatible
- Usage: required
- Value type: <string>
- Definition: Must include "fsl,sec-v4.0"
-
- - fsl,sec-era
- Usage: optional
- Value type: <u32>
- Definition: A standard property. Define the 'ERA' of the SEC
- device.
-
- - #address-cells
- Usage: required
- Value type: <u32>
- Definition: A standard property. Defines the number of cells
- for representing physical addresses in child nodes.
-
- - #size-cells
- Usage: required
- Value type: <u32>
- Definition: A standard property. Defines the number of cells
- for representing the size of physical addresses in
- child nodes.
-
- - reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical
- address and length of the SEC4 configuration registers.
- registers
-
- - ranges
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical address
- range of the SEC 4.0 register space (-SNVS not included). A
- triplet that includes the child address, parent address, &
- length.
-
- - interrupts
- Usage: required
- Value type: <prop_encoded-array>
- Definition: Specifies the interrupts generated by this
- device. The value of the interrupts property
- consists of one interrupt specifier. The format
- of the specifier is defined by the binding document
- describing the node's interrupt parent.
-
- - clocks
- Usage: required if SEC 4.0 requires explicit enablement of clocks
- Value type: <prop_encoded-array>
- Definition: A list of phandle and clock specifier pairs describing
- the clocks required for enabling and disabling SEC 4.0.
-
- - clock-names
- Usage: required if SEC 4.0 requires explicit enablement of clocks
- Value type: <string>
- Definition: A list of clock name strings in the same order as the
- clocks property.
-
- Note: All other standard properties (see the Devicetree Specification)
- are allowed but are optional.
-
-
-EXAMPLE
-
-iMX6QDL/SX requires four clocks
-
- crypto at 300000 {
- compatible = "fsl,sec-v4.0";
- fsl,sec-era = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2>;
- clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
- <&clks IMX6QDL_CLK_CAAM_ACLK>,
- <&clks IMX6QDL_CLK_CAAM_IPG>,
- <&clks IMX6QDL_CLK_EIM_SLOW>;
- clock-names = "mem", "aclk", "ipg", "emi_slow";
- };
-
-
-iMX6UL does only require three clocks
-
- crypto: crypto at 2140000 {
- compatible = "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x2140000 0x3c000>;
- ranges = <0 0x2140000 0x3c000>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&clks IMX6UL_CLK_CAAM_MEM>,
- <&clks IMX6UL_CLK_CAAM_ACLK>,
- <&clks IMX6UL_CLK_CAAM_IPG>;
- clock-names = "mem", "aclk", "ipg";
- };
-
-=====================================================================
-Job Ring (JR) Node
-
- Child of the crypto node defines data processing interface to SEC 4
- across the peripheral bus for purposes of processing
- cryptographic descriptors. The specified address
- range can be made visible to one (or more) cores.
- The interrupt defined for this node is controlled within
- the address range of this node.
-
- - compatible
- Usage: required
- Value type: <string>
- Definition: Must include "fsl,sec-v4.0-job-ring"
-
- - reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: Specifies a two JR parameters: an offset from
- the parent physical address and the length the JR registers.
-
- - fsl,liodn
- Usage: optional-but-recommended
- Value type: <prop-encoded-array>
- Definition:
- Specifies the LIODN to be used in conjunction with
- the ppid-to-liodn table that specifies the PPID to LIODN mapping.
- Needed if the PAMU is used. Value is a 12 bit value
- where value is a LIODN ID for this JR. This property is
- normally set by boot firmware.
-
- - interrupts
- Usage: required
- Value type: <prop_encoded-array>
- Definition: Specifies the interrupts generated by this
- device. The value of the interrupts property
- consists of one interrupt specifier. The format
- of the specifier is defined by the binding document
- describing the node's interrupt parent.
-
-EXAMPLE
- jr at 1000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- fsl,liodn = <0x081>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2>;
- };
-
-
-=====================================================================
-Run Time Integrity Check (RTIC) Node
-
- Child node of the crypto node. Defines a register space that
- contains up to 5 sets of addresses and their lengths (sizes) that
- will be checked at run time. After an initial hash result is
- calculated, these addresses are checked by HW to monitor any
- change. If any memory is modified, a Security Violation is
- triggered (see SNVS definition).
-
-
- - compatible
- Usage: required
- Value type: <string>
- Definition: Must include "fsl,sec-v4.0-rtic".
-
- - #address-cells
- Usage: required
- Value type: <u32>
- Definition: A standard property. Defines the number of cells
- for representing physical addresses in child nodes. Must
- have a value of 1.
-
- - #size-cells
- Usage: required
- Value type: <u32>
- Definition: A standard property. Defines the number of cells
- for representing the size of physical addresses in
- child nodes. Must have a value of 1.
-
- - reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies a two parameters:
- an offset from the parent physical address and the length
- the SEC4 registers.
-
- - ranges
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical address
- range of the SEC 4 register space (-SNVS not included). A
- triplet that includes the child address, parent address, &
- length.
-
-EXAMPLE
- rtic at 6000 {
- compatible = "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
- };
-
-=====================================================================
-Run Time Integrity Check (RTIC) Memory Node
- A child node that defines individual RTIC memory regions that are used to
- perform run-time integrity check of memory areas that should not modified.
- The node defines a register that contains the memory address &
- length (combined) and a second register that contains the hash result
- in big endian format.
-
- - compatible
- Usage: required
- Value type: <string>
- Definition: Must include "fsl,sec-v4.0-rtic-memory".
-
- - reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies two parameters:
- an offset from the parent physical address and the length:
-
- 1. The location of the RTIC memory address & length registers.
- 2. The location RTIC hash result.
-
- - fsl,rtic-region
- Usage: optional-but-recommended
- Value type: <prop-encoded-array>
- Definition:
- Specifies the HW address (36 bit address) for this region
- followed by the length of the HW partition to be checked;
- the address is represented as a 64 bit quantity followed
- by a 32 bit length.
-
- - fsl,liodn
- Usage: optional-but-recommended
- Value type: <prop-encoded-array>
- Definition:
- Specifies the LIODN to be used in conjunction with
- the ppid-to-liodn table that specifies the PPID to LIODN
- mapping. Needed if the PAMU is used. Value is a 12 bit value
- where value is a LIODN ID for this RTIC memory region. This
- property is normally set by boot firmware.
-
-EXAMPLE
- rtic-a at 0 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- fsl,liodn = <0x03c>;
- fsl,rtic-region = <0x12345678 0x12345678 0x12345678>;
- };
-
-=====================================================================
-Secure Non-Volatile Storage (SNVS) Node
-
- Node defines address range and the associated
- interrupt for the SNVS function. This function
- monitors security state information & reports
- security violations. This also included rtc,
- system power off and ON/OFF key.
-
- - compatible
- Usage: required
- Value type: <string>
- Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
-
- - reg
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical
- address and length of the SEC4 configuration
- registers.
-
- - #address-cells
- Usage: required
- Value type: <u32>
- Definition: A standard property. Defines the number of cells
- for representing physical addresses in child nodes. Must
- have a value of 1.
-
- - #size-cells
- Usage: required
- Value type: <u32>
- Definition: A standard property. Defines the number of cells
- for representing the size of physical addresses in
- child nodes. Must have a value of 1.
-
- - ranges
- Usage: required
- Value type: <prop-encoded-array>
- Definition: A standard property. Specifies the physical address
- range of the SNVS register space. A triplet that includes
- the child address, parent address, & length.
-
- - interrupts
- Usage: optional
- Value type: <prop_encoded-array>
- Definition: Specifies the interrupts generated by this
- device. The value of the interrupts property
- consists of one interrupt specifier. The format
- of the specifier is defined by the binding document
- describing the node's interrupt parent.
-
-EXAMPLE
- sec_mon at 314000 {
- compatible = "fsl,sec-v4.0-mon", "syscon";
- reg = <0x314000 0x1000>;
- ranges = <0 0x314000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <93 2>;
- };
-
-=====================================================================
-Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
-
- A SNVS child node that defines SNVS LP RTC.
-
- - compatible
- Usage: required
- Value type: <string>
- Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
-
- - interrupts
- Usage: required
- Value type: <prop_encoded-array>
- Definition: Specifies the interrupts generated by this
- device. The value of the interrupts property
- consists of one interrupt specifier. The format
- of the specifier is defined by the binding document
- describing the node's interrupt parent.
-
- - regmap
- Usage: required
- Value type: <phandle>
- Definition: this is phandle to the register map node.
-
- - offset
- Usage: option
- value type: <u32>
- Definition: LP register offset. default it is 0x34.
-
- - clocks
- Usage: optional, required if SNVS LP RTC requires explicit
- enablement of clocks
- Value type: <prop_encoded-array>
- Definition: a clock specifier describing the clock required for
- enabling and disabling SNVS LP RTC.
-
- - clock-names
- Usage: optional, required if SNVS LP RTC requires explicit
- enablement of clocks
- Value type: <string>
- Definition: clock name string should be "snvs-rtc".
-
-EXAMPLE
- sec_mon_rtc_lp at 1 {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- interrupts = <93 2>;
- regmap = <&snvs>;
- offset = <0x34>;
- clocks = <&clks IMX7D_SNVS_CLK>;
- clock-names = "snvs-rtc";
- };
-
-=====================================================================
-System ON/OFF key driver
-
- The snvs-pwrkey is designed to enable POWER key function which controlled
- by SNVS ONOFF, the driver can report the status of POWER key and wakeup
- system if pressed after system suspend.
-
- - compatible:
- Usage: required
- Value type: <string>
- Definition: Mush include "fsl,sec-v4.0-pwrkey".
-
- - interrupts:
- Usage: required
- Value type: <prop_encoded-array>
- Definition: The SNVS ON/OFF interrupt number to the CPU(s).
-
- - linux,keycode:
- Usage: option
- Value type: <int>
- Definition: Keycode to emit, KEY_POWER by default.
-
- - wakeup-source:
- Usage: option
- Value type: <boo>
- Definition: Button can wake-up the system.
-
- - regmap:
- Usage: required:
- Value type: <phandle>
- Definition: this is phandle to the register map node.
-
-EXAMPLE:
- snvs-pwrkey at 020cc000 {
- compatible = "fsl,sec-v4.0-pwrkey";
- regmap = <&snvs>;
- interrupts = <0 4 0x4>
- linux,keycode = <116>; /* KEY_POWER */
- wakeup-source;
- };
-
-=====================================================================
-FULL EXAMPLE
-
- crypto: crypto at 300000 {
- compatible = "fsl,sec-v4.0";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x300000 0x10000>;
- ranges = <0 0x300000 0x10000>;
- interrupt-parent = <&mpic>;
- interrupts = <92 2>;
-
- sec_jr0: jr at 1000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x1000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <88 2>;
- };
-
- sec_jr1: jr at 2000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <89 2>;
- };
-
- sec_jr2: jr at 3000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x3000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <90 2>;
- };
-
- sec_jr3: jr at 4000 {
- compatible = "fsl,sec-v4.0-job-ring";
- reg = <0x4000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <91 2>;
- };
-
- rtic at 6000 {
- compatible = "fsl,sec-v4.0-rtic";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x6000 0x100>;
- ranges = <0x0 0x6100 0xe00>;
-
- rtic_a: rtic-a at 0 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x00 0x20 0x100 0x80>;
- };
-
- rtic_b: rtic-b at 20 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x20 0x20 0x200 0x80>;
- };
-
- rtic_c: rtic-c at 40 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x40 0x20 0x300 0x80>;
- };
-
- rtic_d: rtic-d at 60 {
- compatible = "fsl,sec-v4.0-rtic-memory";
- reg = <0x60 0x20 0x500 0x80>;
- };
- };
- };
-
- sec_mon: sec_mon at 314000 {
- compatible = "fsl,sec-v4.0-mon";
- reg = <0x314000 0x1000>;
- ranges = <0 0x314000 0x1000>;
-
- sec_mon_rtc_lp at 34 {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- regmap = <&sec_mon>;
- offset = <0x34>;
- interrupts = <93 2>;
- clocks = <&clks IMX7D_SNVS_CLK>;
- clock-names = "snvs-rtc";
- };
-
- snvs-pwrkey at 020cc000 {
- compatible = "fsl,sec-v4.0-pwrkey";
- regmap = <&sec_mon>;
- interrupts = <0 4 0x4>;
- linux,keycode = <116>; /* KEY_POWER */
- wakeup-source;
- };
- };
-
-=====================================================================
--
2.37.1
More information about the linux-arm-kernel
mailing list