[PATCH v5 5/5] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Marek Vasut]

On 2/27/23 19:59, Marco Felsch wrote:
[...]

>> @@ -344,6 +384,18 @@ &i2c3 {
>>   	pinctrl-0 = <&pinctrl_i2c3>;
>>   	status = "okay";
>>   
>> +	wm8960: codec at 1a {
>> +		#sound-dai-cells = <0>;
>> +		compatible = "wlf,wm8960";
>> +		reg = <0x1a>;
> 
> The compatible should be the first property followed by the reg
> property.

See my reply to the mx8mn sound-sai-cells patch , I am not sure here.
The rest is fixed in V6.

>> +		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
>> +		clock-names = "mclk";
>> +		wlf,shared-lrclk;
>> +		wlf,hp-cfg = <3 2 3>;
>> +		wlf,gpio-cfg = <1 3>;
>> +		SPKVDD1-supply = <&reg_audio_pwr>;
>> +	};
>> +
>>   	pca6416: gpio at 20 {
>>   		compatible = "ti,tca6416";
>>   		reg = <0x20>;

[...]

>> @@ -668,6 +730,18 @@ MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
>>   		>;
>>   	};
>>   
>> +	pinctrl_sai3: sai3grp {
>> +		fsl,pins = <
>> +			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
>> +			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
>> +			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
>> +			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
>> +			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
>> +			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0xd6
> 
> What is gpio04-io28 used for?

Apparently unused, dropped.