[PATCH 1/1] arm64: dts: imx93: Add FlexSPI support

[Alexander Stein]

Add FlexSPI node for i.MX93.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
This is mainly taken from the downstream kernel with the clock order
fixed and 'nxp,imx93-fspi' compatible removed.
I do not know if it makes sense to add an imx93 specific compatible or
not. imx8mn uses imx8mm only, but imx8mp has it's own. But the latter
uses the same device data in the driver.

 arch/arm64/boot/dts/freescale/imx93.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 3c3d3d570d8c..1d71ca8d1f5a 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -458,6 +458,21 @@ flexcan2: can at 425b0000 {
 				status = "disabled";
 			};
 
+			flexspi1: spi at 425e0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
 			lpuart7: serial at 42690000 {
 				compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
 				reg = <0x42690000 0x1000>;
-- 
2.34.1