[PATCH v4 2/3] ARM: imx_v6_v7_defconfig: Enable rohm,bd71815

[Alistair Francis]

The reMarkable 2 uses the rohm,bd71815 power controller, so enable it in
the defconfig.

Signed-off-by: Alistair Francis <alistair at alistair23.me>
---
 arch/arm/configs/imx_v6_v7_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 6dc6fed12af8..02ccc86a8d4a 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -213,6 +213,7 @@ CONFIG_GPIO_SIOX=m
 CONFIG_GPIO_MAX732X=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_BD71815=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
 CONFIG_POWER_RESET=y
@@ -242,8 +243,10 @@ CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_MFD_SY7636A=y
 CONFIG_MFD_RN5T618=y
 CONFIG_MFD_STMPE=y
+CONFIG_MFD_ROHM_BD71828=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_BD71815=y
 CONFIG_REGULATOR_DA9052=y
 CONFIG_REGULATOR_DA9062=y
 CONFIG_REGULATOR_DA9063=y
@@ -380,6 +383,7 @@ CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_BD70528=y
 CONFIG_RTC_DRV_RC5T619=y
 CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_DA9063=y
@@ -396,6 +400,7 @@ CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_IMX_MEDIA=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_BD718XX=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MP=y
-- 
2.39.1