[PATCH v2 1/9] dt-bindings: arm: Add support for DSB element

[Tao Zhang]

Hi Suzuki,

在 2/22/2023 2:11 AM, Suzuki K Poulose 写道:
> On 19/01/2023 07:41, Tao Zhang wrote:
>> Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
>> Bit) element for TPDA. Specifies the DSB element size supported
>> by each monitor connected to the aggregator on each port. Should
>> be specified in pairs (port, dsb element size).
>>
>> Signed-off-by: Tao Zhang <quic_taozha at quicinc.com>
>> Signed-off-by: Tao Zhang <taozha at qti.qualcomm.com>
>> ---
>>   .../bindings/arm/qcom,coresight-tpda.yaml          | 22 
>> ++++++++++++++++++++++
>>   1 file changed, 22 insertions(+)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml 
>> b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
>> index 2ec9b5b..298db7f 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
>> @@ -58,6 +58,26 @@ properties:
>>       minItems: 1
>>       maxItems: 2
>>   +  qcom,dsb-element-size:
>> +    description: |
>> +      Specifies the DSB(Discrete Single Bit) element size supported by
>> +      each monitor connected to the aggregator on each port. Should be
>> +      specified in pairs <port, dsb element size>.
>
> Isn't this a property of the TPDM connected to the port ? i.e. the DSB 
> size ? Thus shouldn't this be part of the TPDM device (and the TPDA 
> will be able to find it from the TPDM device) ?
>
Since  the port number is about the input port of TPDA, this property 
needs to be configured in the TPDA-related settings.

In our current design, TPDM doesn't have a register to record the DSB 
size, and TPDA cannot actively know the TPDM DSB size from the TPDM device.

>
> Suzuki

Best,

Tao