[PATCH v3 3/3] ARM: dts: imx7d-remarkable2: Enable the rohm,bd71815

[Alistair Francis]

On Sun, Feb 26, 2023 at 6:37 AM Fabio Estevam <festevam at gmail.com> wrote:
>
> On Sat, Feb 25, 2023 at 8:37 AM Alistair Francis <alistair at alistair23.me> wrote:
>
> > +&i2c2 {
> > +       clock-frequency = <100000>;
> > +       pinctrl-names = "default";
> > +       pinctrl-0 = <&pinctrl_i2c2>;
> > +       status = "okay";
> > +
> > +       bd71815: pmic at 4b {
> > +               compatible = "rohm,bd71815";
> > +               reg = <0x4b>;
> > +               pinctrl-names = "default";
> > +               pinctrl-0 = <&pinctrl_bd71815>;
> > +               interrupt-parent = <&gpio6>; /* PMIC_INT_B GPIO6_IO16 */
> > +               interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> > +               gpio-controller;
> > +               clocks = <&clks IMX7D_CLKO2_ROOT_SRC>;
> > +               clock-output-names = "bd71815-32k-out";
> > +               #clock-cells = <0>;
> > +               #gpio-cells = <1>;
>
> The binding document says #gpio-cells = <2>;

Fixed!

>
> > +
> > +               regulators {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +
> > +                       buck1_reg: regulator at 0 {
> > +                               reg = <0>;
>
> The regulator at 0 and reg should not be present.

Fixed

>
> Please check Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml

Thanks, I double checked my latest code against the bindings.

Alistair