[PATCH 2/2] ARM: dts: exynos: add ports to TC358764 bridge on Arndale

[Krzysztof Kozlowski]

The Toshiba TC358764 bridge binding expect up two ports as it is a
bridge, thus add ports property to encapsulate them.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 2e3da5670bc2..c03bb436bfed 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -192,12 +192,15 @@ bridge at 0 {
 		vddio-supply = <&vcc_1v8_reg>;
 		vddlvds-supply = <&vcc_3v3_reg>;
 		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port at 1 {
-			reg = <1>;
-			bridge_out_ep: endpoint {
-				remote-endpoint = <&panel_ep>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port at 1 {
+				reg = <1>;
+				bridge_out_ep: endpoint {
+					remote-endpoint = <&panel_ep>;
+				};
 			};
 		};
 	};
-- 
2.34.1