[PATCH v3 6/6] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Luca Ceresoli]

Hi Marek,

On Thu, 23 Feb 2023 17:24:32 +0100
Marek Vasut <marex at denx.de> wrote:

> On 2/22/23 18:22, Luca Ceresoli wrote:
> > Hello Marek,  
> 
> Hi,
> 
> > On Sat, 25 Jun 2022 03:32:35 +0200
> > Marek Vasut <marex at denx.de> wrote:
> >   
> >> Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
> >> This is all that is needed to get analog audio output operational
> >> on i.MX8MP EVK.
> >>
> >> Signed-off-by: Marek Vasut <marex at denx.de>
> >> Cc: Abel Vesa <abel.vesa at nxp.com>
> >> Cc: Fabio Estevam <festevam at gmail.com>
> >> Cc: Jacky Bai <ping.bai at nxp.com>
> >> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> >> Cc: Lucas Stach <l.stach at pengutronix.de>
> >> Cc: Michael Turquette <mturquette at baylibre.com>
> >> Cc: Shawn Guo <shawnguo at kernel.org>
> >> Cc: Stephen Boyd <sboyd at kernel.org>
> >> Cc: linux-arm-kernel at lists.infradead.org
> >> Cc: linux-clk at vger.kernel.org
> >> Cc: linux-imx at nxp.com  
> > 
> > I'm sending in reply to this e-mail the device tree patch I have used
> > for my audio testing on the MSC SM2-MB-EP1 board. Feel free to add it to
> > your series if you want, it obviously depends on it.  
> 
> Lemme just mark this email locally and start with the MX8MP EVK . If the 
> audio patches ever get upstream, then this one can be easily 
> resubmitted. Does that work ?

Sure.

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com