[PATCH] dt-bindings: fpga: xilinx-spi: convert bindings to json-schema

[Krzysztof Kozlowski]

On 24/02/2023 12:37, Nava kishore Manne wrote:
> Convert xilinx-spi bindings to DT schema format using json-schema

Missing full stop.

> 
> Signed-off-by: Nava kishore Manne <nava.kishore.manne at amd.com>
> ---
>  .../bindings/fpga/xilinx-slave-serial.txt     | 51 ------------
>  .../bindings/fpga/xlnx,fpga-slave-serial.yaml | 77 +++++++++++++++++++
>  2 files changed, 77 insertions(+), 51 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
>  create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml


Thank you for your patch. There is something to discuss/improve.


> +++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-serial.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx Slave Serial SPI FPGA driver.

Drop driver and full stop.

> +
> +maintainers:
> +  - Nava kishore Manne <nava.kishore.manne at amd.com>
> +
> +description: |
> +  Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the bitstream
> +  over what is referred to as slave serial interface.The slave serial link is
> +  not technically SPI, and might require extra circuits in order to play nicely
> +  with other SPI slaves on the same bus.
> +  Please refer to fpga-region.txt in this directory for  common binding part
> +  and usage.

Just one space, not two. But what exactly from fpga-region comes here?
If it is used, you need to mention it otherwise it's not allowed to be
used...


> +
> +  Datasheets:
> +    https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
> +    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
> +    https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
> +

Missing allOf to spi-peripheral-props.

> +properties:
> +  compatible:
> +    items:

No need for items, drop it.

> +      - enum:
> +          - xlnx,fpga-slave-serial
> +
> +  spi-cpha: true
> +
> +  spi-max-frequency:
> +    maximum: 60000000
> +
> +  reg:
> +    maxItems: 1
> +
> +  prog_b-gpios:
> +    description:
> +      config pin (referred to as PROGRAM_B in the manual)

maxItems

> +
> +  done-gpios:
> +    description:
> +      config status pin (referred to as DONE in the manual)

maxItems

> +
> +  init-b-gpios:
> +    description:
> +      initialization status and configuration error pin
> +      (referred to as INIT_B in the manual)

maxItems

> +
> +required:
> +  - compatible
> +  - reg
> +  - prog_b-gpios
> +  - done-gpios
> +  - init-b-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    spi0 {

spi

> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      fpga_mgr_spi: fpga-mgr at 0 {
> +        compatible = "xlnx,fpga-slave-serial";
> +        spi-max-frequency = <60000000>;
> +        spi-cpha;
> +        reg = <0>;
> +        prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
> +        init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
> +        done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> +      };
> +    };
> +...

Best regards,
Krzysztof