[PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Marco Felsch]

On 23-02-23, Marek Vasut wrote:
> On 2/22/23 20:02, Marco Felsch wrote:
> 
> Hi,
> 
> [...]
> 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > index 8547391d9cbbf..3b38ec7bb47be 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> > @@ -47,7 +47,6 @@ reg_audio_pwr: regulator-audio-pwr {
> >   		regulator-max-microvolt = <3300000>;
> >   		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
> >   		enable-active-high;
> > -		regulator-always-on;
> >   	};
> >   	reg_can1_stby: regulator-can1-stby {
> > @@ -94,21 +93,34 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
> >   		enable-active-high;
> >   	};
> > -	sound-wm8960 {
> > -		compatible = "fsl,imx-audio-wm8960";
> > -		model = "wm8960-audio";
> > -		audio-cpu = <&sai3>;
> > -		audio-codec = <&codec>;
> > -		audio-routing =
> > +	sound-wm8524 {
> 
> Why WM8524 ? The MX8MP EVK I have here is populated with WM8960 chip and
> with single headphone jack, are you sure the below is correct ?

Argh.. the name was copied from 8MM evk dts but the below setup is
working, at least the audio-outpath. Didn't tested the mic path.

Regards,
  Marco