[PATCH 5/6] clk: samsung: exynos850: Add AUD and HSI main gate clocks
Sam Protsenko
semen.protsenko at linaro.org
Wed Feb 22 18:27:18 PST 2023
On Tue, 14 Feb 2023 at 20:41, CHANHO PARK <chanho61.park at samsung.com> wrote:
>
> > -----Original Message-----
> > From: Sam Protsenko <semen.protsenko at linaro.org>
> > Sent: Saturday, February 11, 2023 3:40 PM
> > To: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>; Chanwoo Choi
> > <cw00.choi at samsung.com>; Sylwester Nawrocki <s.nawrocki at samsung.com>; Rob
> > Herring <robh+dt at kernel.org>
> > Cc: David Virag <virag.david003 at gmail.com>; Chanho Park
> > <chanho61.park at samsung.com>; Alim Akhtar <alim.akhtar at samsung.com>; Sumit
> > Semwal <sumit.semwal at linaro.org>; Tomasz Figa <tomasz.figa at gmail.com>;
> > Michael Turquette <mturquette at baylibre.com>; Stephen Boyd
> > <sboyd at kernel.org>; linux-samsung-soc at vger.kernel.org; linux-
> > clk at vger.kernel.org; devicetree at vger.kernel.org; linux-arm-
> > kernel at lists.infradead.org; linux-kernel at vger.kernel.org
> > Subject: [PATCH 5/6] clk: samsung: exynos850: Add AUD and HSI main gate
> > clocks
> >
> > Add main gate clocks for controlling AUD and HSI CMUs:
> > - gout_aud_cmu_aud_pclk
> > - gout_hsi_cmu_hsi_pclk
> >
> > Those clocks were marked as CLK_IGNORE_UNUSED, as system hangs on boot
> > otherwise.
> >
> > While at it, add missing PPMU (Performance Profiling Monitor Unit) clocks
> > for CMU_HSI.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko at linaro.org>
> > ---
> > drivers/clk/samsung/clk-exynos850.c | 18 ++++++++++++++++++
> > 1 file changed, 18 insertions(+)
> >
> > diff --git a/drivers/clk/samsung/clk-exynos850.c
> > b/drivers/clk/samsung/clk-exynos850.c
> > index a24eff42baae..3d776d57cc8f 100644
> > --- a/drivers/clk/samsung/clk-exynos850.c
> > +++ b/drivers/clk/samsung/clk-exynos850.c
> > @@ -674,6 +674,7 @@ static const struct samsung_cmu_info apm_cmu_info
> > __initconst = {
> > #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF4 0x2014
> > #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF5 0x2018
> > #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF6 0x201c
> > +#define CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK 0x2020
> > #define CLK_CON_GAT_GOUT_AUD_ABOX_ACLK 0x2048
> > #define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_SPDY 0x204c
> > #define CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_ASB 0x2050
> > @@ -729,6 +730,7 @@ static const unsigned long aud_clk_regs[] __initconst
> > = {
> > CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF4,
> > CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF5,
> > CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF6,
> > + CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK,
> > CLK_CON_GAT_GOUT_AUD_ABOX_ACLK,
> > CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_SPDY,
> > CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_ASB,
> > @@ -848,6 +850,9 @@ static const struct samsung_div_clock aud_div_clks[]
> > __initconst = { };
> >
> > static const struct samsung_gate_clock aud_gate_clks[] __initconst = {
> > + GATE(CLK_GOUT_AUD_CMU_AUD_PCLK, "gout_aud_cmu_aud_pclk",
> > + "dout_aud_busd",
> > + CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK, 21, CLK_IGNORE_UNUSED, 0),
> > GATE(CLK_GOUT_AUD_CA32_CCLK, "gout_aud_ca32_cclk",
> > "mout_aud_cpu_hch",
> > CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_CA32, 21, 0, 0),
> > GATE(CLK_GOUT_AUD_ASB_CCLK, "gout_aud_asb_cclk",
> > "dout_aud_cpu_aclk", @@ -1117,12 +1122,15 @@ static const struct
> > samsung_cmu_info g3d_cmu_info __initconst = {
> > #define PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER 0x0610
> > #define PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER 0x0620
> > #define CLK_CON_MUX_MUX_CLK_HSI_RTC 0x1000
> > +#define CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK 0x2000
> > #define CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV 0x2008
> > #define CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50 0x200c
> > #define CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26 0x2010
> > #define CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK 0x2018
> > #define CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK 0x2024
> > #define CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN 0x2028
> > +#define CLK_CON_GAT_GOUT_HSI_PPMU_ACLK 0x202c
> > +#define CLK_CON_GAT_GOUT_HSI_PPMU_PCLK 0x2030
> > #define CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK 0x2038
> > #define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20 0x203c
> > #define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY 0x2040
> > @@ -1132,12 +1140,15 @@ static const unsigned long hsi_clk_regs[]
> > __initconst = {
> > PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
> > PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
> > CLK_CON_MUX_MUX_CLK_HSI_RTC,
> > + CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK,
> > CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV,
> > CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50,
> > CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26,
> > CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK,
> > CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK,
> > CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN,
> > + CLK_CON_GAT_GOUT_HSI_PPMU_ACLK,
> > + CLK_CON_GAT_GOUT_HSI_PPMU_PCLK,
> > CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK,
> > CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20,
> > CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY,
> > @@ -1163,6 +1174,9 @@ static const struct samsung_mux_clock hsi_mux_clks[]
> > __initconst = { };
> >
> > static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
> > + GATE(CLK_GOUT_HSI_CMU_HSI_PCLK, "gout_hsi_cmu_hsi_pclk",
> > + "mout_hsi_bus_user",
> > + CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK, 21, CLK_IGNORE_UNUSED, 0),
>
> You'll need to put /* TODO: */ tag or use CLK_IS_CRITICAL if you make sure it is the critical clock.
>
Thanks for the review! I'll add the comment for now, as it's done in
other CMUs for similar clocks. As for making it critical: maybe I'll
do it as a part of PM enablement, which I'm working on right now (if
it's needed). But in that case I'd like to provide a separate patch
for making all similar clocks (XXX_CMU_XXX) critical, so not in this
patch.
Will send v2 soon.
> > GATE(CLK_GOUT_USB_RTC_CLK, "gout_usb_rtc", "mout_hsi_rtc",
> > CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV, 21, 0, 0),
> > GATE(CLK_GOUT_USB_REF_CLK, "gout_usb_ref", "mout_hsi_usb20drd_user",
> > @@ -1177,6 +1191,10 @@ static const struct samsung_gate_clock
> > hsi_gate_clks[] __initconst = {
> > GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
> > "mout_hsi_mmc_card_user",
> > CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN, 21, CLK_SET_RATE_PARENT,
> > 0),
> > + GATE(CLK_GOUT_HSI_PPMU_ACLK, "gout_hsi_ppmu_aclk",
> > "mout_hsi_bus_user",
> > + CLK_CON_GAT_GOUT_HSI_PPMU_ACLK, 21, 0, 0),
> > + GATE(CLK_GOUT_HSI_PPMU_PCLK, "gout_hsi_ppmu_pclk",
> > "mout_hsi_bus_user",
> > + CLK_CON_GAT_GOUT_HSI_PPMU_PCLK, 21, 0, 0),
> > GATE(CLK_GOUT_SYSREG_HSI_PCLK, "gout_sysreg_hsi_pclk",
> > "mout_hsi_bus_user",
> > CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK, 21, 0, 0),
> > --
> > 2.39.1
More information about the linux-arm-kernel
mailing list