[PATCH] arm64: dts: imx8mp-msc-sm2s: Add sound card

[Marco Felsch]

Hi Luca,

On 23-02-22, Luca Ceresoli wrote:
> The MSC SM2-MB-EP1 carrier board for the SM2S-IMX8PLUS SMARC module has an
> NXPP SGTL5000 audio codec connected to I2S-0 (sai2).
> 
> This requires to:
> 
>  * add the power supplies (always on)
>  * enable sai2 with pinmuxes
>  * reparent the CLKOUT1 clock that feeds the codec SYS_MCLK to
>    IMX8MP_CLK_24M in order it to generate an accurate 24 MHz rate
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli at bootlin.com>
> ---
>  .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 60 +++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> index 470ff8e31e32..894d9809f76d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
> @@ -14,6 +14,57 @@ / {
>  	compatible = "avnet,sm2s-imx8mp-14N0600E-ep1",
>  		     "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>  		     "fsl,imx8mp";

...

> +/* I2S-0 = sai2 */
> +&sai2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai2>;
> +
> +	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
> +	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <12288000>;
> +
> +	fsl,sai-mclk-direction-output;
> +	status = "okay";
>  };

Do you have some downstream patches for the sai interfaces? AFAIR Marek
worked on this but the patches are not mainlien yet.

Regards,
  Marco