[PATCH v3 6/6] arm64: dts: imx8mp: Add analog audio output on i.MX8MP EVK

[Luca Ceresoli]

Hello Marek,

On Sat, 25 Jun 2022 03:32:35 +0200
Marek Vasut <marex at denx.de> wrote:

> Enable SAI3 on i.MX8MP EVK, add WM8960 codec binding and regulator.
> This is all that is needed to get analog audio output operational
> on i.MX8MP EVK.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Abel Vesa <abel.vesa at nxp.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Jacky Bai <ping.bai at nxp.com>
> Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: Michael Turquette <mturquette at baylibre.com>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: Stephen Boyd <sboyd at kernel.org>
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-clk at vger.kernel.org
> Cc: linux-imx at nxp.com

I'm sending in reply to this e-mail the device tree patch I have used
for my audio testing on the MSC SM2-MB-EP1 board. Feel free to add it to
your series if you want, it obviously depends on it.

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com