[PATCH v2 1/9] dt-bindings: arm: Add support for DSB element

[Suzuki K Poulose]

On 19/01/2023 07:41, Tao Zhang wrote:
> Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
> Bit) element for TPDA. Specifies the DSB element size supported
> by each monitor connected to the aggregator on each port. Should
> be specified in pairs (port, dsb element size).
> 
> Signed-off-by: Tao Zhang <quic_taozha at quicinc.com>
> Signed-off-by: Tao Zhang <taozha at qti.qualcomm.com>
> ---
>   .../bindings/arm/qcom,coresight-tpda.yaml          | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> index 2ec9b5b..298db7f 100644
> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> @@ -58,6 +58,26 @@ properties:
>       minItems: 1
>       maxItems: 2
>   
> +  qcom,dsb-element-size:
> +    description: |
> +      Specifies the DSB(Discrete Single Bit) element size supported by
> +      each monitor connected to the aggregator on each port. Should be
> +      specified in pairs <port, dsb element size>.

Isn't this a property of the TPDM connected to the port ? i.e. the DSB 
size ? Thus shouldn't this be part of the TPDM device (and the TPDA will 
be able to find it from the TPDM device) ?


Suzuki