[PATCH v4 0/6] drm: lcdif: Add i.MX93 LCDIF support
Rasmus Villemoes
rasmus.villemoes at prevas.dk
Mon Feb 20 04:18:59 PST 2023
On 17/02/2023 09.18, Alexander Stein wrote:
> Hi Liu,
>
> Am Freitag, 17. Februar 2023, 07:54:01 CET schrieb Liu Ying:
>> Hi,
>>
>> This patch set aims to add i.MX93 LCDIF display controller support
>> in the existing LCDIF DRM driver. The LCDIF embedded in i.MX93 SoC
>> is essentially the same to those embedded in i.MX8mp SoC. Through
>> internal bridges, i.MX93 LCDIF may drive a MIPI DSI display or a LVDS
>> display or a parallel display.
>>
>> Patch 1/6 adds device tree binding support for i.MX93 LCDIF in the
>> existing fsl,lcdif.yaml.
>>
>> Patch 2/6 drops lcdif->bridge NULL pointer check as a cleanup patch.
>>
>> Patch 3/6~5/6 prepare for adding i.MX93 LCDIF support step by step.
>>
>> Patch 6/6 adds i.MX93 LCDIF compatible string as the last step of
>> adding i.MX93 LCDIF support.
>
> Thanks for the series. I could test this on my TQMa93xxLA/MBa93xxCA with a
> single LVDS display attached, so no DSI or parallel display. Hence I could not
> test the bus format and flags checks, but they look okay.
> So you can add
> Tested-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> to the whole series as well.
>
> One thing I noticed is that, sometimes it seems that before probing lcdif my
> system completely freezes. Adding some debug output it seems that's during
> powering up the IMX93_MEDIABLK_PD_LCDIF power domain there is some race
> condition. But adding more more detailed output made the problem go away.
> Did you notice something similar? It might be a red hering though.
Interesting. Sounds similar to what I encountered on several
imx8mp-based boards, both the NXP EVK and our custom design, running a
mainline U-Boot and downstream NXP kernel:
https://lore.kernel.org/u-boot/20220823133645.4046432-1-rasmus.villemoes@prevas.dk/
I never really found a real solution, but as the hack I ended up
applying in U-Boot does involve some clock settings, and you apparently
now figured out some connection to "overclocking", I do think these
issues are related.
Rasmus
More information about the linux-arm-kernel
mailing list