[PATCH v1 04/17] thermal/hwmon: Do not set no_hwmon before calling thermal_add_hwmon_sysfs()

[Daniel Lezcano]

The thermal->tzp->no_hwmon parameter is only used when calling
thermal_zone_device_register().

Setting it to 'false' before calling thermal_add_hwmon_sysfs() has no
effect.

Remove the call and again prevent the drivers to access the thermal
internals.

Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
---
 drivers/thermal/broadcom/bcm2711_thermal.c | 1 -
 drivers/thermal/broadcom/bcm2835_thermal.c | 1 -
 drivers/thermal/rcar_gen3_thermal.c        | 1 -
 drivers/thermal/rcar_thermal.c             | 5 -----
 drivers/thermal/rockchip_thermal.c         | 1 -
 drivers/thermal/rzg2l_thermal.c            | 1 -
 6 files changed, 10 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2711_thermal.c b/drivers/thermal/broadcom/bcm2711_thermal.c
index 18b1a4d9ecc7..0a499435431c 100644
--- a/drivers/thermal/broadcom/bcm2711_thermal.c
+++ b/drivers/thermal/broadcom/bcm2711_thermal.c
@@ -98,7 +98,6 @@ static int bcm2711_thermal_probe(struct platform_device *pdev)
 
 	priv->thermal = thermal;
 
-	thermal->tzp->no_hwmon = false;
 	return thermal_add_hwmon_sysfs(thermal);
 }
 
diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index de2f573863da..8ed7a80122a0 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -267,7 +267,6 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 	 * Thermal_zone doesn't enable hwmon as default,
 	 * enable it here
 	 */
-	tz->tzp->no_hwmon = false;
 	err = thermal_add_hwmon_sysfs(tz);
 	if (err)
 		goto err_tz;
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 8ad713cb4bf7..4ea9d4bd8e6f 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -527,7 +527,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		}
 		tsc->zone = zone;
 
-		tsc->zone->tzp->no_hwmon = false;
 		ret = thermal_add_hwmon_sysfs(tsc->zone);
 		if (ret)
 			goto error_unregister;
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 538ed6731589..919f0e32d3c5 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -509,11 +509,6 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		}
 
 		if (chip->use_of_thermal) {
-			/*
-			 * thermal_zone doesn't enable hwmon as default,
-			 * but, enable it here to keep compatible
-			 */
-			priv->zone->tzp->no_hwmon = false;
 			ret = thermal_add_hwmon_sysfs(priv->zone);
 			if (ret)
 				goto error_unregister;
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index bd593ec712ee..3211b70c85b9 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1451,7 +1451,6 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 
 	for (i = 0; i < thermal->chip->chn_num; i++) {
 		rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
-		thermal->sensors[i].tzd->tzp->no_hwmon = false;
 		error = thermal_add_hwmon_sysfs(thermal->sensors[i].tzd);
 		if (error)
 			dev_warn(&pdev->dev,
diff --git a/drivers/thermal/rzg2l_thermal.c b/drivers/thermal/rzg2l_thermal.c
index d3ba2a74e42d..a2f21c941cfe 100644
--- a/drivers/thermal/rzg2l_thermal.c
+++ b/drivers/thermal/rzg2l_thermal.c
@@ -216,7 +216,6 @@ static int rzg2l_thermal_probe(struct platform_device *pdev)
 	}
 
 	priv->zone = zone;
-	priv->zone->tzp->no_hwmon = false;
 	ret = thermal_add_hwmon_sysfs(priv->zone);
 	if (ret)
 		goto err;
-- 
2.34.1