[PATCH V2 2/5] clk: qcom: apss-ipq-pll: Enable APSS clock driver in IPQ9574

[Devi Priya]

Add the compatible and configuration values
for A73 Huayra PLL found on IPQ9574

Co-developed-by: Praveenkumar I <quic_ipkumar at quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar at quicinc.com>
Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
---
 Changes in V2:
	- Rebased the changes on the below series which refactors the
	  driver to accommodate Huayra & Stromer Plus PLLs
	  https://lore.kernel.org/linux-arm-msm/20230217083308.12017-2-quic_kathirav@quicinc.com/
	- Changed the hex value in ipq9574_pll_config to lowercase
	- Dropped the mailbox driver changes as ipq9574 mailbox is 
	  compatible with ipq6018

 drivers/clk/qcom/apss-ipq-pll.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index cf4f0d340cbf..ce28d882ee78 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -111,6 +111,18 @@ static const struct alpha_pll_config ipq8074_pll_config = {
 	.test_ctl_hi_val = 0x4000,
 };
 
+static const struct alpha_pll_config ipq9574_pll_config = {
+	.l = 0x3b,
+	.config_ctl_val = 0x200d4828,
+	.config_ctl_hi_val = 0x6,
+	.early_output_mask = BIT(3),
+	.aux2_output_mask = BIT(2),
+	.aux_output_mask = BIT(1),
+	.main_output_mask = BIT(0),
+	.test_ctl_val = 0x0,
+	.test_ctl_hi_val = 0x4000,
+};
+
 struct apss_pll_data {
 	int pll_type;
 	struct clk_alpha_pll *pll;
@@ -135,6 +147,12 @@ static struct apss_pll_data ipq6018_pll_data = {
 	.pll_config = &ipq6018_pll_config,
 };
 
+static struct apss_pll_data ipq9574_pll_data = {
+	.pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
+	.pll = &ipq_pll_huayra,
+	.pll_config = &ipq9574_pll_config,
+};
+
 static const struct regmap_config ipq_pll_regmap_config = {
 	.reg_bits		= 32,
 	.reg_stride		= 4,
@@ -180,6 +198,7 @@ static const struct of_device_id apss_ipq_pll_match_table[] = {
 	{ .compatible = "qcom,ipq5332-a53pll", .data = &ipq5332_pll_data },
 	{ .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_data },
 	{ .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_data },
+	{ .compatible = "qcom,ipq9574-a73pll", .data = &ipq9574_pll_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
-- 
2.17.1