[PATCH v3 0/5] Bluetooth: hci_mrvl: Add serdev support for 88W8997

[Luiz Augusto von Dentz]

Hi Francesco,

On Mon, Feb 13, 2023 at 4:09 AM Francesco Dolcini <francesco at dolcini.it> wrote:
>
> From: Francesco Dolcini <francesco.dolcini at toradex.com>
>
> Add serdev support for the 88W8997 from NXP (previously Marvell). It includes
> support for changing the baud rate. The command to change the baud rate is
> taken from the user manual UM11483 Rev. 9 in section 7 (Bring-up of Bluetooth
> interfaces) from NXP.
>
> v3:
>  - Use __hci_cmd_sync_status instead of __hci_cmd_sync
>
> v2:
>  - Fix the subject as pointed out by Krzysztof. Thanks!
>  - Fix indentation in marvell-bluetooth.yaml
>  - Fix compiler warning for kernel builds without CONFIG_OF enabled
>
> Stefan Eichenberger (5):
>   dt-bindings: bluetooth: marvell: add 88W8997
>   dt-bindings: bluetooth: marvell: add max-speed property
>   Bluetooth: hci_mrvl: use maybe_unused macro for device tree ids
>   Bluetooth: hci_mrvl: Add serdev support for 88W8997
>   arm64: dts: imx8mp-verdin: add 88W8997 serdev to uart4
>
>  .../bindings/net/marvell-bluetooth.yaml       | 20 ++++-
>  .../dts/freescale/imx8mp-verdin-wifi.dtsi     |  5 ++
>  drivers/bluetooth/hci_mrvl.c                  | 90 ++++++++++++++++---
>  3 files changed, 104 insertions(+), 11 deletions(-)
>
> --
> 2.25.1

There seems to be missing one patch 5/5:

https://patchwork.kernel.org/project/bluetooth/list/?series=721269

Other than that the Bluetooth parts seem fine, and perhaps can be
merged if the patch above is not really required.


-- 
Luiz Augusto von Dentz