[PATCH v5 1/3] input: bbnsm_pwrkey: Add bbnsm power key support
Jacky Bai
ping.bai at nxp.com
Tue Feb 14 18:41:15 PST 2023
The ON/OFF logic inside the BBNSM allows for connecting directly
into a PMIC or other voltage regulator device. The module has an
button input signal and a wakeup request input signal. It also
has two interrupts (set_pwr_off_irq and set_pwr_on_irq) and an
active-low PMIC enable (pmic_en_b) output.
Add the power key support for the ON/OFF button function found in
BBNSM module.
Signed-off-by: Jacky Bai <ping.bai at nxp.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
- v5 changes:
- move the bbnsm pwr key driver to input/misc as Dmitry suggested
- replace del_timer_sync with timer_shutdown_sync()
- minor refine for error log string
- v4 changes:
- update the compatible string to align with binding file
- fix the device_property_read_u32 as stated in v2.
- add back the 'dev_warn' for 'dev_pm_set_wake_irq' return fail.
- v3 changes:
- get the regmap directly from the parent node
- v2 changes:
- use device_property_read_u32() to read the property
- clean up the goto return, return directly
- sort the header file alphabetically
- rename the file to add 'nxp' prefix
---
drivers/input/misc/Kconfig | 11 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/nxp-bbnsm-pwrkey.c | 192 ++++++++++++++++++++++++++
3 files changed, 204 insertions(+)
create mode 100644 drivers/input/misc/nxp-bbnsm-pwrkey.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 5c2d0c06d2a5..81a54a59e13c 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -119,6 +119,17 @@ config INPUT_ATMEL_CAPTOUCH
To compile this driver as a module, choose M here: the
module will be called atmel_captouch.
+config INPUT_BBNSM_PWRKEY
+ tristate "NXP BBNSM Power Key Driver"
+ depends on ARCH_MXC || COMPILE_TEST
+ depends on OF
+ help
+ This is the bbnsm powerkey driver for the NXP i.MX application
+ processors.
+
+ To compile this driver as a module, choose M here; the
+ module will be called bbnsm_pwrkey.
+
config INPUT_BMA150
tristate "BMA150/SMB380 acceleration sensor support"
depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 61949263300d..04296a4abe8e 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_INPUT_ATC260X_ONKEY) += atc260x-onkey.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o
+obj-$(CONFIG_INPUT_BBNSM_PWRKEY) += nxp-bbnsm-pwrkey.o
obj-$(CONFIG_INPUT_BMA150) += bma150.o
obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
diff --git a/drivers/input/misc/nxp-bbnsm-pwrkey.c b/drivers/input/misc/nxp-bbnsm-pwrkey.c
new file mode 100644
index 000000000000..737e202ec513
--- /dev/null
+++ b/drivers/input/misc/nxp-bbnsm-pwrkey.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2022 NXP.
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+
+#define BBNSM_CTRL 0x8
+#define BBNSM_INT_EN 0x10
+#define BBNSM_EVENTS 0x14
+#define BBNSM_PAD_CTRL 0x24
+
+#define BBNSM_BTN_PRESSED BIT(7)
+#define BBNSM_PWR_ON BIT(6)
+#define BBNSM_BTN_OFF BIT(5)
+#define BBNSM_EMG_OFF BIT(4)
+#define BBNSM_PWRKEY_EVENTS (BBNSM_PWR_ON | BBNSM_BTN_OFF | BBNSM_EMG_OFF)
+#define BBNSM_DP_EN BIT(24)
+
+#define DEBOUNCE_TIME 30
+#define REPEAT_INTERVAL 60
+
+struct bbnsm_pwrkey {
+ struct regmap *regmap;
+ int irq;
+ int keycode;
+ int keystate; /* 1:pressed */
+ struct timer_list check_timer;
+ struct input_dev *input;
+};
+
+static void bbnsm_pwrkey_check_for_events(struct timer_list *t)
+{
+ struct bbnsm_pwrkey *bbnsm = from_timer(bbnsm, t, check_timer);
+ struct input_dev *input = bbnsm->input;
+ u32 state;
+
+ regmap_read(bbnsm->regmap, BBNSM_EVENTS, &state);
+
+ state = state & BBNSM_BTN_PRESSED ? 1 : 0;
+
+ /* only report new event if status changed */
+ if (state ^ bbnsm->keystate) {
+ bbnsm->keystate = state;
+ input_event(input, EV_KEY, bbnsm->keycode, state);
+ input_sync(input);
+ pm_relax(bbnsm->input->dev.parent);
+ }
+
+ /* repeat check if pressed long */
+ if (state) {
+ mod_timer(&bbnsm->check_timer,
+ jiffies + msecs_to_jiffies(REPEAT_INTERVAL));
+ }
+}
+
+static irqreturn_t bbnsm_pwrkey_interrupt(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct bbnsm_pwrkey *bbnsm = platform_get_drvdata(pdev);
+ struct input_dev *input = bbnsm->input;
+ u32 event;
+
+ regmap_read(bbnsm->regmap, BBNSM_EVENTS, &event);
+ if (event & BBNSM_BTN_OFF)
+ mod_timer(&bbnsm->check_timer, jiffies + msecs_to_jiffies(DEBOUNCE_TIME));
+ else
+ return IRQ_NONE;
+
+ pm_wakeup_event(input->dev.parent, 0);
+
+ /* clear PWR OFF */
+ regmap_write(bbnsm->regmap, BBNSM_EVENTS, BBNSM_BTN_OFF);
+
+ return IRQ_HANDLED;
+}
+
+static void bbnsm_pwrkey_act(void *pdata)
+{
+ struct bbnsm_pwrkey *bbnsm = pdata;
+
+ timer_shutdown_sync(&bbnsm->check_timer);
+}
+
+static int bbnsm_pwrkey_probe(struct platform_device *pdev)
+{
+ struct bbnsm_pwrkey *bbnsm;
+ struct input_dev *input;
+ struct device_node *np = pdev->dev.of_node;
+ int error;
+
+ bbnsm = devm_kzalloc(&pdev->dev, sizeof(*bbnsm), GFP_KERNEL);
+ if (!bbnsm)
+ return -ENOMEM;
+
+ bbnsm->regmap = syscon_node_to_regmap(np->parent);
+ if (IS_ERR(bbnsm->regmap)) {
+ dev_err(&pdev->dev, "bbnsm pwerkey get regmap failed\n");
+ return PTR_ERR(bbnsm->regmap);
+ }
+
+ if (device_property_read_u32(&pdev->dev, "linux,code", &bbnsm->keycode)) {
+ bbnsm->keycode = KEY_POWER;
+ dev_warn(&pdev->dev, "key code is not specified, using default KEY_POWER\n");
+ }
+
+ bbnsm->irq = platform_get_irq(pdev, 0);
+ if (bbnsm->irq < 0)
+ return -EINVAL;
+
+ /* config the BBNSM power related register */
+ regmap_update_bits(bbnsm->regmap, BBNSM_CTRL, BBNSM_DP_EN, BBNSM_DP_EN);
+
+ /* clear the unexpected interrupt before driver ready */
+ regmap_write_bits(bbnsm->regmap, BBNSM_EVENTS, BBNSM_PWRKEY_EVENTS, BBNSM_PWRKEY_EVENTS);
+
+ timer_setup(&bbnsm->check_timer, bbnsm_pwrkey_check_for_events, 0);
+
+ input = devm_input_allocate_device(&pdev->dev);
+ if (!input) {
+ dev_err(&pdev->dev, "failed to allocate the input device\n");
+ return -ENOMEM;
+ }
+
+ input->name = pdev->name;
+ input->phys = "bbnsm-pwrkey/input0";
+ input->id.bustype = BUS_HOST;
+
+ input_set_capability(input, EV_KEY, bbnsm->keycode);
+
+ /* input customer action to cancel release timer */
+ error = devm_add_action(&pdev->dev, bbnsm_pwrkey_act, bbnsm);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register remove action\n");
+ return error;
+ }
+
+ bbnsm->input = input;
+ platform_set_drvdata(pdev, bbnsm);
+
+ error = devm_request_irq(&pdev->dev, bbnsm->irq, bbnsm_pwrkey_interrupt,
+ IRQF_SHARED, pdev->name, pdev);
+ if (error) {
+ dev_err(&pdev->dev, "interrupt not available.\n");
+ return error;
+ }
+
+ error = input_register_device(input);
+ if (error < 0) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ return error;
+ }
+
+ device_init_wakeup(&pdev->dev, true);
+ error = dev_pm_set_wake_irq(&pdev->dev, bbnsm->irq);
+ if (error)
+ dev_warn(&pdev->dev, "irq wake enable failed.\n");
+
+ return 0;
+}
+
+static const struct of_device_id bbnsm_pwrkey_ids[] = {
+ { .compatible = "nxp,imx93-bbnsm-pwrkey" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bbnsm_pwrkey_ids);
+
+static struct platform_driver bbnsm_pwrkey_driver = {
+ .driver = {
+ .name = "bbnsm_pwrkey",
+ .of_match_table = bbnsm_pwrkey_ids,
+ },
+ .probe = bbnsm_pwrkey_probe,
+};
+module_platform_driver(bbnsm_pwrkey_driver);
+
+MODULE_AUTHOR("Jacky Bai <ping.bai at nxp.com>");
+MODULE_DESCRIPTION("NXP bbnsm power key Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
More information about the linux-arm-kernel
mailing list