[PATCH net-next v2 03/10] net: microchip: sparx5: Egress VLAN TPID configuration follows IFH

[Steen Hegelund]

This changes the TPID of the egress frames to use the TPID stored in the
IFH (internal frame header), which ensures that this is the TPID classified
for the frame at ingress.

Signed-off-by: Steen Hegelund <steen.hegelund at microchip.com>
---
 drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c b/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c
index 34f954bbf815..ac001ae59a38 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_vlan.c
@@ -219,8 +219,8 @@ void sparx5_vlan_port_apply(struct sparx5 *sparx5,
 	spx5_wr(val, sparx5,
 		ANA_CL_VLAN_FILTER_CTRL(port->portno, 0));
 
-	/* Egress configuration (REW_TAG_CFG): VLAN tag type to 8021Q */
-	val = REW_TAG_CTRL_TAG_TPID_CFG_SET(0);
+	/* Egress configuration (REW_TAG_CFG): VLAN tag selected via IFH */
+	val = REW_TAG_CTRL_TAG_TPID_CFG_SET(5);
 	if (port->vlan_aware) {
 		if (port->vid)
 			/* Tag all frames except when VID == DEFAULT_VLAN */
-- 
2.39.1