[PATCH] dt-bindings: mmc: fsl-imx-esdhc: Improve grammar and fix a typo

[Ulf Hansson]

On Sun, 29 Jan 2023 at 14:01, Jonathan Neuschäfer <j.neuschaefer at gmx.net> wrote:
>
> This makes the text read a little better.
>
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> index dc6256f04b423..1c79b68753da0 100644
> --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
> @@ -98,7 +98,7 @@ properties:
>        Specify the number of delay cells for override mode.
>        This is used to set the clock delay for DLL(Delay Line) on override mode
>        to select a proper data sampling window in case the clock quality is not good
> -      due to signal path is too long on the board. Please refer to eSDHC/uSDHC
> +      because the signal path is too long on the board. Please refer to eSDHC/uSDHC
>        chapter, DLL (Delay Line) section in RM for details.
>      default: 0
>
> @@ -127,7 +127,7 @@ properties:
>        Specify the increasing delay cell steps in tuning procedure.
>        The uSDHC use one delay cell as default increasing step to do tuning process.
>        This property allows user to change the tuning step to more than one delay
> -      cells which is useful for some special boards or cards when the default
> +      cell which is useful for some special boards or cards when the default
>        tuning step can't find the proper delay window within limited tuning retries.
>      default: 0
>
> --
> 2.39.0
>